[App_rpt-users] EchoLink issue

[Bob]

If the other suggestions do not work, try the following in echolink.conf

server1=server1.echolink.org
server2=server2.echolink.org
server3=server3.echolink.org

It will likely sync with one of the servers. Mine connects to server1 only,
and shows it is online at Echolink.org. 

Bob
KK6ECM

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Bryan D. Boyle
Sent: Sunday, December 22, 2013 4:40 PM
To: Buddy Brannan
Cc: App_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] EchoLink issue

it should be remembered that due to the architecture...starting up and
logging in with your elink app and when the asterisk endpoint knows about it
is not instantaneous if direct app to server connection, due to the fact the
asterisk box only updates its list of auth'd endpoints every 10 minutes or
so.  try going thru a well-known proxy, they should be persistent.  

and change the servers in the config file as below.  

--
Bryan
Sent from my iPhone 5...small
keyboard, big fingers...please
forgive misspellings...



> On Dec 22, 2013, at 19:28, Buddy Brannan <buddy at brannan.name> wrote:
> 
> I think server2 is the server that doesn't work. Try this.it's what's in
my echo link.conf file:
> 
> server1=naeast.echolink.org
> server2=servers.echolink.org
> server3=servers.echolink.org
> 
>> On Dec 22, 2013, at 7:12 PM, wade <wadeo at charter.net> wrote:
>> 
>> The ports are forwarding to the correct IP address. There is only one
connection per location for echolink.  All was working properly the first
day, then the second day came and no inbound connections are possible. We
can also no longer get in from our Android phones. 
>> 
>> Thi is the message my friend gets.
>> 
>> ERROR [2306] chan_echolink.c: connect{} failed to connect to the echolink
server server2.echolink.org
>> 
>> Hope this can help diagnose what going on here..
>> 
>> Wade
>> KC0MLT
>> 
>> 
>>> On 12/22/2013 2:46 PM, mike at midnighteng.com wrote:
>>> 
>>> one thing to check...
>>> incoming and outgoing routes in your router udp ports for echolink and
allstar
>>> 
>>> then know that
>>> 
>>> echolink only allows one connection per ip address.
>>> 
>>> Hope that leads you somewhere if you have not found it.
>>> 
>>> ...mike/kb8jnm
>>> 
>>> 
>>> -------- Original Message --------
>>> Subject: [App_rpt-users] EchoLink issue
>>> From: wade <wadeo at charter.net>
>>> Date: Sun, December 22, 2013 3:39 pm
>>> To: App_rpt-users at ohnosec.org
>>> 
>>> Hello all,
>>> 
>>> I recently helped a friend here in town to setup his first AllStar node.

>>> After getting everything up and running including the echolink part the 
>>> next day it stopped allowing incoming connections. After doing some 
>>> investigation mine has also stopped allowing incoming connections. Both 
>>> of ours can connect out from our nodes but no one can connect in. On my 
>>> node it comeback with a simple time out message, on his node it comes 
>>> back with unauthorized. Has anyone had this issue before and if so what 
>>> was the fix?
>>> 
>>> Our routers have all the appropriate port forwarding settings in them 
>>> and have since the echolink on windows days. This is just a very strange

>>> occurrence to me that both of us have this problem and get two different

>>> messages back to other users. Any help would be greatly appreciated!
>>> 
>>> Thanks
>>> Wade
>>> KC0MLT
>>> 
>>> AllStar node 28757
>>> Echolink node number 223846
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users