[App_rpt-users] iax2 registry issue

[Corey Dean]

Lu,

I think I run the default port on just one node.  The rest of mine use 4560-4567 and 4570 and up.  The repeater sites do not have an issue nor does my ISP at home, but I have ran into the issue in other places as well...

Corey N3FE
________________________________________
From: app_rpt-users-bounces at ohnosec.org [app_rpt-users-bounces at ohnosec.org] On Behalf Of Lu Vencl [vencl at att.net]
Sent: Monday, December 30, 2013 11:10 PM
To: 'Christopher Kovacs'; 'app_rpt-users'
Subject: Re: [App_rpt-users] iax2 registry issue

All,
I have been having issues off and one for months and I swear that if I reboot my router a few times to get a new IP, the problem clears.
This time I decided to try something differnet to see if the ISP might be playing games or might be having issues with 4569.
I changed my UDP port 4569 to 14569 and bingo it registered immediately.
So if you might want to try that. There is something going on at least with my ISP I use in Colorado (Century Link) and I think this might be the fix.
Just passing along if you are also having issues.
Remember, you will need to change your port on the allstarlink portal and a couple of conf files. Anything with 4569 is what I changed to 14569

Lu,
KA4EPS

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Christopher Kovacs
Sent: Saturday, December 28, 2013 6:06 PM
To: app_rpt-users
Subject: [App_rpt-users] iax2 registry issue

Hi All,

I am running Xipar release of asterisk and am new to asterisk.


I have been having issues with iax2 registration.  I can not figure out how to re-register the node.  The only thing that works is a reboot.


CLI> iax2 show registry

Host                  dnsmgr  Username    Perceived             Refresh  State
67.215.233.178:4569<http://67.215.233.178:4569>   N       29062       <Unregistered>             60  Timeout
67.215.233.178:4569<http://67.215.233.178:4569>   N       29061       <Unregistered>             60  Request Sent

CLI> iax2 show stats
    IAX Statistics
---------------------
Outstanding frames: 2 (0 ingress, 2 egress)
Packets in transmit queue: 0 dead, 0 final, 2 total

I can not connect to any other nodes until re-registered and get a "connection failed".

Thanks in advance,

Chris,  w0anm