[App_rpt-users] what does priority mean

[Ken]

This has to do witih which codec is selected when  you make the IAX connection. In iaxRpt you can specify codecs under Option/Preferences/Codec .   

In your iax.conf file of the repeater you will have codecs too -  under the [gui] heading (if that is the user name in iaxRpt).

A common codec has to be chosen for the two systems. 

If not specified by a 

codecpriority=

statement, then the Host usually gets the priority. 

The two parties to the call are: the incoming caller and the Host.

73
Ken


-----Original Message-----
From: Pierre Martel <petem001 at hotmail.com>
To: APP RPT <app_rpt-users at ohnosec.org>
Sent: Sat, Feb 2, 2013 3:28 pm
Subject: [App_rpt-users] what does priority mean



when I connect to my node with iaxrpt I see this in the logs
 
-- Accepting AUTHENTICATED call from xxx.xxx.xxx.xxx:
      > requested format = ulaw,
      > requested prefs = (),
      > actual format = ulaw,
      > host prefs = (ulaw|gsm),
      > priority = mine
   
what does priority = mine  mean?
 
Does it have to do with what audio have prioroty on the other in a simplex link?
 
 

 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130202/4269778c/attachment.html>