[App_rpt-users] SCOM 7330

[Steve Schulze]

Anyone have a working node using an SCOM 7330 in line?

I currently am trying to get these two to work. It's about 80% right now.

Audio from the node box is making it to the repeater and keying the 
transmitter, no problem there. The problem I'm having is the audio from 
the repeater not getting into the node box. I see the audio on a scope 
at pin 9 (mic_in) on the URI. I also have a transition from high to low 
on pins 7 and 8 (COR Det and CTCSS Det) when the 7330 tells it to transmit.

On the 7330, I'm using port 1 for the repeater. Port 3 is connect to the 
URI.

Paths on 7330 as follows:
RX-1 to TX-1
RX-1 to TX-3
RX-3 to TX-1

In rpt.conf I have duplex=0 and linktolink=on

In USB radio I have carrierfrom=usb and ctcssfrom=usb


Looking for thoughts / suggestions.


Thanks in advance!


-- 
Amateur Radio - The Original Social Media

Steve Schulze - Radio Amateur, General Class - N9UDO
Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ
Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727
Treasurer, Badgerland Amateur Television Society - KB9SFS

http://yellowthunder.org/dstar.html