[App_rpt-users] New node assistance

[Ken]

see:

http://kd3su.us/allStar/acid-sysadmin.pdf

The Alinco VHF/UHF DR-series rigs have a handy DB9 at the back. 
You can set the radio to 9600 packet and use asterisk's DSP squelch, etc.


GL
Ken
 



-----Original Message-----
From: Peter Watkins <vk3tkk at yahoo.com.au>
To: app_rpt-users <app_rpt-users at ohnosec.org>
Sent: Mon, Feb 11, 2013 11:11 am
Subject: [App_rpt-users] New node assistance



Hi,


Recently, I've set the audio with a URI and an Alinco rig along with an app_rpt box (node 27183). 

I'm a complete newbie to Asterisk/app_rpt and am interested in learning about the system. 
I've looked and tried some of the commands on the ohnosec but I've had no success with the system.
Operating from the CLI (asterisk -r) I see the software detects TX via 'radio set debug' but, beyond that, I'm a little lost. I've also tried the troubleshooting page on the same website and everything seems OK, and I've set the appropriate port number on the router.


I'm quite happy to read and learn about the system - if someone could assist and put me in the right direction, I'd appreciate it.


73 Peter VK3TKK



_______________________________________________
pp_rpt-users mailing list
pp_rpt-users at ohnosec.org
ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130211/74b0612b/attachment.html>