[App_rpt-users] Alinco DR-135

[K7ILO]

Ok thanks for the info.

I guess Alinco didn't really have a fix for that then if it's happening in
the MK3's.

I think the one I have is MK2, not sure.

Anyway, Ill deal with this radio until I get some more commercial radios,
which I would rather use anyway.

 

Thanks again all so far and if anyone else comments and

Happy New Year to everyone in the group.

 

Harold

K7ILO

Las Vegas, NV

 

From: Ken [mailto:ke2n at cs.com] 
Sent: Tuesday, January 01, 2013 7:31 PM
To: 'Scott Weis'; 'K7ILO'; app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Alinco DR-135

 

Ouch

 

I run mine on medium or low power and have a big fan on top of each one .

Maybe that is why I don't hear anything bad

 

 

Ken

 

From: Scott Weis [mailto:kb2ear at kb2ear.net] 
Sent: Tuesday, January 01, 2013 10:16 PM
To: 'Ken'; 'K7ILO'; app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] Alinco DR-135

 

I have had several DR-135Mkiii and 235s and 435s all with the same audio
problem on TX and RX.  It seems that when the radio gets hot too many time
is starts happening. Worse on higher power.

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Ken
Sent: Tuesday, January 01, 2013 8:19 PM
To: 'K7ILO'; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Alinco DR-135

 

I would note that the DR135 has now been replaced by DR135Mk3 which has some
substantial changes to the modulation circuit.

 

But I am curious if the radio makes the noises when you transmit with no
audio?

 

If you overdrive the URI you will get some nasty noises. One way to do this
is putting the PL and voice on the same output channel. In that case the two
gain controls (txtone & txvoice) must add up to something less than 1000, as
noted in the knowledge base.

 

Regards

 

Ken

 

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of K7ILO
Sent: Tuesday, January 01, 2013 8:04 PM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Alinco DR-135

 

Hello all.

 

I know I have seen a few threads on using the DR-135 as a node radio so I
decided to ask this question.

Has anyone using this radio had problems with a crackling noise or popping
noise when the radio transmits?

It doesn't matter if you are using the data port (for audio) or the mike and
speaker jacks.

Its not all the time but happens more than it doesn't.

 

Thanks for any input into this matter.

 

Harold

K7ilo

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130101/dded2c18/attachment.html>