[App_rpt-users] Echolink Connection Issue

[Ken]

Check your echolink.conf file and see if you have:

 confmode=no

That is telling Asterisk that connections to conferences is prohibited.

73

Ken

> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
> bounces at ohnosec.org] On Behalf Of Matt Roberts
> Sent: Friday, January 11, 2013 11:06 AM
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Echolink Connection Issue
> 
> I am attempting to connect to Echolink 494492. I enter the command on my
> repeater, "*33494492." This is the *handiham* conference. The repeater
> acknowledges the command, and then I get a connection refused message
> from my repeater. The owner of the conference has tried to connect to my
> system, and could not do so either. Any other Echolink node I have ever
> connected to, or has connected to me has been able to do so.
> My repeater is set as a DMZ host on my router. With this configuration, no
> port forwarding should be required. I don't know if there is a log file
which
> will allow me to diagnose this problem. I found one, but it was over 100MB
in
> size. That file appeared to not have any useful information in it. I also
tried
> from the CLI, and that didn't give me any information either.
> Has anyone else experienced this kind of problem? The owner of the
> conference is saying it's an issue with Allstar, but I don't think so! If
it was an
> Allstar issue, I wouldn't be able to connect to Echolink nodes at all.
> 
> Matt Roberts
> Phone: 386-679-1986
> n9gmr at me.com
> 
> Sent from my iPhone
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users