[App_rpt-users] Echolink Connection Issue

[Matt Roberts]

I do have that. Should I change it to "yes?"

Matt Roberts
Phone: 386-679-1986
n9gmr at me.com

Sent from my iPhone

On Jan 11, 2013, at 5:22 PM, Ken <ke2n at cs.com> wrote:

> Check your echolink.conf file and see if you have:
> 
> confmode=no
> 
> That is telling Asterisk that connections to conferences is prohibited.
> 
> 73
> 
> Ken
> 
>> -----Original Message-----
>> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
>> bounces at ohnosec.org] On Behalf Of Matt Roberts
>> Sent: Friday, January 11, 2013 11:06 AM
>> To: app_rpt-users at ohnosec.org
>> Subject: [App_rpt-users] Echolink Connection Issue
>> 
>> I am attempting to connect to Echolink 494492. I enter the command on my
>> repeater, "*33494492." This is the *handiham* conference. The repeater
>> acknowledges the command, and then I get a connection refused message
>> from my repeater. The owner of the conference has tried to connect to my
>> system, and could not do so either. Any other Echolink node I have ever
>> connected to, or has connected to me has been able to do so.
>> My repeater is set as a DMZ host on my router. With this configuration, no
>> port forwarding should be required. I don't know if there is a log file
> which
>> will allow me to diagnose this problem. I found one, but it was over 100MB
> in
>> size. That file appeared to not have any useful information in it. I also
> tried
>> from the CLI, and that didn't give me any information either.
>> Has anyone else experienced this kind of problem? The owner of the
>> conference is saying it's an issue with Allstar, but I don't think so! If
> it was an
>> Allstar issue, I wouldn't be able to connect to Echolink nodes at all.
>> 
>> Matt Roberts
>> Phone: 386-679-1986
>> n9gmr at me.com
>> 
>> Sent from my iPhone
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>