[App_rpt-users] Remote base help

[Eric Guth]

Michael,

Are you using Ham radio deluxe to control and interface to the radio using the URI?  I am looking for a way to control all of my ham station using some interface like the URI to consolidate my microphone, DTMF, Key, and speaker into one unit.

73,

Eric
4Z5UG / WA6IGR
Allstar Node: 28422
4Z5UG at guth.us<mailto:4Z5UG at guth.us>
Israel Direct: 077-950-9451
USA Direct: +1-720-377-3840



From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Michael Hebert
Sent: Monday, January 14, 2013 3:57 AM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Remote base help

Group,

Can someone please help me out either on or off list? I have 2 nodes hooked up to my ACID box using URIx. One is an allstar public node that is hooked up to a UHF repeater. The other is a private node remote base hooked up to a FT-817ND. Audio is working great on both radios. I am able to connect and disconnect with no problems between the nodes. So, to get to the point, I am not able to remote command the remote base either from DTMF via the repeater or CLI. I have tried both a serial and USB CAT cable from the ACID box. I am able to control the FT817ND with no problems using ham radio deluxe, so I know both cables and the radio are working. I did hook up a null modem cable from the port in rpt.conf to my laptop and I am seeing something in putty. I have tried the 3 port speeds that the radio supports for CAT. The data I am seeing using putty is unreadable for all 3 speeds. I do not know what to do next

Any thoughts??

Thanks,

Mike - KD5DFB

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130114/e7e6903e/attachment.html>