[App_rpt-users] Configuration for URIx

[barbagris]

Hi Chris.
Look at this website: http://www.qsl.net/k0kn/index.html
Best wishes
John
EA2BKH
----- Original Message ----- 
From: "Chris Andrist" <chris.andrist at gmail.com>
To: <app_rpt-users at ohnosec.org>
Sent: Wednesday, January 23, 2013 2:21 AM
Subject: [App_rpt-users] Configuration for URIx


>I am converting my IRLP node to allstar.
>
> I have tried lots of configuration, but can't get receive audio. TX
> Audio works just fine.
>
> My repeater has a built in controller. I want allstar to get the
> receive audio from the repeater and pass it to the Internet. Take the
> audio from the Internet and key the repeater and pass the audio.
>
> Repeater to URIx hookup.
> RX Audio -> URI Pin 21
> TX Audio -> URI Pin 22
> COR -> URI Pin 8
> PTT -> URI Pin 1
> Ground -> URI Pin 20
>
> Here is what I would like it to do:
> 1. Do not repeat audio.
> 2. Use COR. No need to detect or transmit CTCSS the repeater does it very 
> well.
> 3. No Repeater ID.
> 4. No courtesy tone.
> 5. No hang time.
>
> Any help would be appreciated. I have tried 10-12 configurations and I
> feel like I am losing my mind.
>
> Regards,
>
> Chris Andrist, KC7WSU
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users