[App_rpt-users] Configuration for URIx

[Chris Andrist]

Tom,

That did the trick!

Thank you.

--
Chris Andrist, KC7WSU

On Jan 22, 2013, at 9:00 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:

> In your node stanza:
>
> duplex=0
> linktolink=yes
> idrecording=
>
>
>
> FYI...
> http://ohnosec.org/drupal/node/84
> http://ohnosec.org/drupal/node/40
>
> --
> Tim
> :wq
>
> On Jan 22, 2013, at 5:21 PM, Chris Andrist <chris.andrist at gmail.com> wrote:
>
>> I am converting my IRLP node to allstar.
>>
>> I have tried lots of configuration, but can't get receive audio. TX
>> Audio works just fine.
>>
>> My repeater has a built in controller. I want allstar to get the
>> receive audio from the repeater and pass it to the Internet. Take the
>> audio from the Internet and key the repeater and pass the audio.
>>
>> Repeater to URIx hookup.
>> RX Audio -> URI Pin 21
>> TX Audio -> URI Pin 22
>> COR -> URI Pin 8
>> PTT -> URI Pin 1
>> Ground -> URI Pin 20
>>
>> Here is what I would like it to do:
>> 1. Do not repeat audio.
>> 2. Use COR. No need to detect or transmit CTCSS the repeater does it very well.
>> 3. No Repeater ID.
>> 4. No courtesy tone.
>> 5. No hang time.
>>
>> Any help would be appreciated. I have tried 10-12 configurations and I
>> feel like I am losing my mind.
>>
>> Regards,
>>
>> Chris Andrist, KC7WSU
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>