[App_rpt-users] uri to msf5000 interface - ever done one?

[James Smith]

not enough tx audio problem ive been having.

i cant get anymore than 1.1khz max dieviation out of it using the uri.
if i use the uri amplifier to boost the audio , i get somewhere around
2.5khz, i am able to her that it is clearly distorted and choppy audio.

so , ive got a digital capable uhf r2 msf5000. it worked great as a stand
alone ham band repeater on 442.925 and the audio - everything was fine
using its own controller.

so i changed the codeplug to what some guy WA1??? on
repeater-builder recommended for the settings for using an external
controller. because i want the allstar box to control the whole box. i
preferred dsp for audio.

i soldered to the TP2 ,3,4,and TP9 test point to get my audio and
everything else. i want to use those because it said the tp for reciever
audio is pre-emphasis. so all the wires go to one area and then all my
connections are soldered to the corresponding TestPoint connectors.

so i tried making a interface cable to the j2 side mount plug (the 25pin on
the side of the station) same result on audio. i used line 2+ and line 4+
for the audio. With the audio maxed out -still 1.1 khz coming out with no
audio amp and about 2.6khz and distorted and choppy coming out with the
audio amp.

anything come to mind?

 i hope to get this figured out , so i can interface the next msf. where
did y'all interface your uri's to an msf?

thanks so much ,

james kd5oxm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130125/9c6037ad/attachment.html>