[App_rpt-users] No interface found

[Corey Dean]

That is because you need to put radio active nodenumber..  For example if I was node 2339 I would put  radio active 2339.  I hope this helps!!!

Corey  N3FE

From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Rick
Sent: Friday, January 25, 2013 7:47 PM
To: App_rpt-users at ohnosec.org
Subject: [App_rpt-users] No interface found

Hi,
I have installed the Acid Centos ISO on a Bosanova thin client with a Via chipset. The USB fob is a modded StarTech with the cm108 chip on it. I have tried to reinstall it a couple times and dowloaded the config. from AllStar site with my node #. When I open the Asririsk CLI and use the Radio active interface command or radio active usb , I get the "no interface found" or no USB found. Could this be caused by a incompatibility with the Via chipset or have I missed a step in the setup.
Any comment would be greatly appreciated.
Thanks,
Rick
W4KDM

--
This message was scanned and is believed to be clean.
Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=317711FA3.A87F5>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130125/79ebd78c/attachment.html>