[App_rpt-users] [Bulk] Issue with Hangup after first keying
Robert a. Poff
wb3awj at comcast.net
Wed Jul 3 23:46:09 UTC 2013
Try the top of either the volume or squelch controls.
Joshua Hintze <joshh at imsar.com> wrote:
>Thank you for all the suggestions thus far.
>
>I'm using an ICOM IC-A110 VHF radio. I was able to find some
>schematics/block diagrams in the service manual here:
>
>http://elektrotanya.com/icom_ic-a110,_a110e_service_manual.pdf/download.html
>
>This is my first time trying to dig through a radio and find a COR. I'm
>not
>sure either where to get a discriminator audio signal either.
>
>Josh
>
>-----Original Message-----
>From: Bryan D. Boyle [mailto:bdboyle at bdboyle.com]
>Sent: Wednesday, July 03, 2013 3:29 PM
>To: Joshua Hintze
>Subject: Re: [App_rpt-users] [Bulk] Issue with Hangup after first
>keying
>
>On 7/3/2013 4:48 PM, Joshua Hintze wrote:
>> Thanks Ben for the quick feedback. I think I might have figured it
>out. It
>turns out my COR signal might not necessarily be the best COR signal.
>It
>looks like the signal goes high on BOTH RX and TX. This is probably
>causing
>asterisk to think its receiving when its sending getting into a nice
>infinite loop.
>>
>
>Then you don't have a true COR signal. What radio (make/model) are you
>using? Can you get discriminator audio?? If so, you can use dsp to
>derive COR; otherwise, you need to look elsewhere. Sounds like you're
>too far down the circuit.
>
>> I'm going to try an AND gate with the PTT so that PTT has to be high
>(i.e.
>NOT TX) and speaker mute (my COR) has to be high for a true COR output
>on
>RX.
>>
>
>Sounds complicated; I'm thinking some quality time with the schematic
>will provide an answer that is more agreeable and doesn't require
>building logic circuits. In all the machines I've built the most
>complex interface has been a pullup resistor on the DB25 connector.
>And
>that's for everything from a micor to wouxun HTs to maxtracs and gtx's
>and systel, and ALinco radio-based repeaters. And throw in a couple GE
>rigs (Mastr-IIs) along the way. Heck, I even interfaced a TR-33C as a
>receiver in a pinch.
>
>> In the meantime I tried carrierfrom=vox but it didn't really seem to
>work.
>Anybody get this working properly?
>>
>
>As our Maximum Leader Jim says: "Friends don't let friends use VOX".
>Not a way to do it; and is an artifact of development.
>
>BB WB0YLE
>Allstar 27294, 27295, 27673, 27710, etc.
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130703/a7c3de37/attachment.html>
More information about the App_rpt-users
mailing list