[App_rpt-users] SIP/IAX access

[Benjamin L. Naber]

what exactly are you trying to do, regarding these particular set of
stanzas?

~Benjamin, KB9LFZ



On Fri, 2013-07-05 at 01:14 -0700, Mark Johnston wrote:
> Does anyone know the correct configuration/what else I have to do to
> get SIP or IAX access working? 
> 
> 
> I tried this
> 
> 
> A user stanza in sip.conf or iax.conf should look like this:
> [my-­ip-­phone]
> type=user                                      
> context=radio­control                          
> auth=md5
> secret=nunya  ; Important! Change this!!!
> disallow=all
> allow=gsm
> allow=ulaw
> transfer=no 
> 
> 
> The radio­control context in extensions.conf should look like this:
> [radio-­control] ; Change all instances of 1234 to your node num.
> exten=1234,1,Answer 
> exten=1234,n,Playback,rpt/node 
> exten=1234,n,Playback,digits/1 
> exten=1234,n,Playback,digits/2 
> exten=1234,n,Playback,digits/3 
> exten=1234,n,Playback,digits/4 
> exten=1234,n,Rpt,1234|P
> 
> 
> I replaced the secret with a pw, and exten with my node 28344
> added a line for username=.... 
> 
> 
> My sip client says Request timeout, using the local wifi network to
> connect.
> so not a router issue... I have tried a few combinations... Any ideas?
> 
> 
> Thanks,
> 
> 
> 
> 
>           Mark, KC7DMF
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users