[App_rpt-users] FLAT vs Preemphasized audio

[Benjamin L. Naber]

The settings you have thought to be for usbradio.conf appear to be
correct.

Not sure about the simpleusb for DMK URI. You can use the DMK URI with
usbradio.conf. I like the usbradio.conf over simpleusb, seems to me a
lot of folks are having issues with simpleusb.

Remember to use radio-tune-menu with a service monitor to ensure your
TX/RX audio levels are set appropriately!

~Benjamin, KB9LFZ





On Sun, 2013-07-21 at 23:15 -0700, KJ6KO wrote:
> We plan on interfacing with a Palomar repeater controller which uses
> FLAT audio in and out.  It is designed strictly for disc audio in and
> output directly to a radio's modulator.  
>  
> Would the settings.....
> RXDEMOD = FLAT
> TXPRELIM = YES
> .... be correct to make sure the Palomar gets already pre-emphasized
> audio in and audio coming from the Palomar to the URI is de-emphasized
> in the URI before going out to the rest of the network?  Many of the
> other nodes on the network are using MIC inputs and "Speaker" audio
> out.
>  
> Would these commands go in the usbradio.conf file?
> If it is a DMK URI, would the same commands go in the simpleusb.conf
> file?
> Seems I remember setting something like this in the initial DMK
> setup...have only done one DMK.
> Not sure if final unit will be a DMK or some other URI.
>  
> ...I know...a lot of questions!
>  
> Thanks....
> 
> 
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 8594 (20130721) __________
> 
> The message was checked by ESET NOD32 Antivirus.
> 
> http://www.eset.com
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users