[App_rpt-users] RTCM to GPS 18x LVC

[Michael Hebert]

Jim,

Thanks for looking at the issue. That was the problem! I have updated the
pinout for anyone else that might need it. Also, does the RTCM just need
the 1 PPS or does it need both 1 PPS and the NEMA string?

   RTCM GPS 18x LVC   7 GPPS <-- Pulse Output 1 Yellow  13 +5V --> Vin 2 Red
8 GND Ground 3 Black  14 GTX --> TX Data 4 White  8 GND Ground 5 Black  6
GRX <-- Rx Data 6 Green
Mike - KD5DFB




On Sun, Jul 21, 2013 at 7:41 PM, Jim Duuuude <telesistant at hotmail.com>wrote:

> Dont quote me on this, but I SWEAR (from questionable memory) that the pin
> that
> the data goes from the "puck" to the RTCM on is on the BOTTOM row, not the
> top
> (next to the PPS), so I would (off hand) say that you have your TX and RX
> reversed.
>
> Again, this is entirely from memory. I may VERY WELL be wrong.
>
> The best thing to do is try it.
>
> Jim
>
>
> ------------------------------
> Date: Sun, 21 Jul 2013 07:56:47 -0500
> From: mhebert1975 at gmail.com
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] RTCM to GPS 18x LVC
>
> All,
>
> I am setting up a voter system using the RTCM and GPS 18x LVC. Has anyone
> used the Garmin GPS 18x LVC to interface with the RTCM?
>
> Here is the pinout I have. want to make sure it is correct.
>
>
> RTCM
> GPS 18x LVC
>
>  7 PTT Out <-- Pulse Output 1 Yellow  13 5Vdc --> Vin 2 Red  8 Ground
> Ground 3 Black  6 Rx Data <-- TX Data 4 White  8 Ground
> Ground 5 Black  14 TX Data --> Rx Data 6 Red
> Thanks,
>
> Mike - KD5DFB
>
>
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130723/6c596c59/attachment.html>