[App_rpt-users] Courtesy Tones.....

[James Hill]

Right, I have broken out a COR line from my radio (+5v when a carrier is
detected).

What do I do with it now?

I've tried going via a resistor and diode into the PP, pin 15 but the node
is permanently locked into RX regardless of any connection. My
usbradio.conf is pasted below:

[usb29681]

hdwtype=0
rxboost=1
txboost=1
rxctcssrelax=1
;#txctcssdefault=100.0
;#rxctcssfreqs=100.0
;#txctcssfreqs=100.0
;rxctcssoverride=0
carrierfrom=pp
pp15=cor
ctcssfrom=no
rxdemod=speaker
txprelim=no
txlimonly=no
txtoctype=notone
txmixa=voice
txmixb=no
invertptt=0
duplex=0
rxondelay=0
rxnoisefiltype=0
eeprom=0

PP in BIOS is set to Bi Directional (assuming it makes a difference?). If I
have to, I'll go on to pin 47 (I think) of the CM108 chip, but I'd rather
try the PP method first!

Cheers,

J
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130625/8d543fbf/attachment.html>