[App_rpt-users] Anyone Virtualizing?

Kirk Just Kirk wb6egr at gmail.com
Wed Jun 26 18:44:10 UTC 2013


Save the IRLP bashing for another day? Why.....just call it like it is. It
was good in it's day...but so was AM Stereo,Betamax and Furby. IRLP will
soon become a memory. After all....who pays $170 for a obsolete PCB with a
SSI202 chip on it.....
On Jun 26, 2013 8:37 AM, "Michael Hebert" <mhebert1975 at gmail.com> wrote:

> The URI will not work with a virtual server.
>
>
> On Wed, Jun 26, 2013 at 1:18 PM, Jonathan Weirmeir <
> jonathan.weirmeir at gmail.com> wrote:
>
>> Just to be clear, I dumped IRLP a long time ago. Reasons include, but are
>> not limited to, IRLP being a giant kludge. I'll save the IRLP bashing for
>> another day.
>>
>> I like virtualizing for security reasons, as well as reducing the
>> electric bill from having to run multiple different systems. I've had good
>> results so far virtualizing with VirtualBox.
>>
>> Just wondering if AllStar plays well virtualized, especially with the URI
>> and USB sound fobs.
>>
>> -J
>>
>>
>> On Jun 26, 2013 1:16 PM, "Keith Goobie" <keith at goobie.org> wrote:
>>
>>>  Why virtualize (I am assuming you are thinking of a third party
>>> product) – this is linux – a multi-tasking environment.  You can run both
>>> on the same machine.
>>>
>>> Keith
>>>
>>>
>>> On 6/26/13 1:11 PM, "Jonathan Weirmeir" <jonathan.weirmeir at gmail.com>
>>> wrote:
>>>
>>> Hi, group!
>>>
>>> I'm new to app_rpt RoIP, coming from a background with IRLP.
>>>
>>> I'm wondering if anyone has ever tried virtualizing AllStar, and if so,
>>> were there any issues.
>>>
>>> Thanks!
>>>
>>> Jonathan
>>>
>>> On Jun 23, 2013 10:39 PM, "Benjamin L. Naber" <Benjamin at kb9lfz.com>
>>> wrote:
>>>
>>> Robert,
>>>
>>> I am using a Neoware CA-22. It is both server and node on one machine. I
>>> do not have any other machines for my allstar node. While watching top,
>>> the CPU has yet to get busier than 0.4. It is using DSP for audio, and
>>> runs without fail.
>>>
>>> It has 12Vdc input with a standard barrel plug. Not sure what the low
>>> voltage cut-off is, but it runs fine on a SLA battery that just came
>>> from an auto charger that goes to float after bulk charging brings it up
>>> to 14.1V. The current draw varies, usually above 500mA at idle, and
>>> about 750mA when I'm talking to or listening on the node.
>>>
>>> It has a 1GHz processor, 1GB RAM and 1GB flash drive. I used what I had,
>>> but you will have space left over if you are only able to get 512MB RAM
>>> and 512MB flash.
>>>
>>> I don't remember if I am using Limey Linux for VIA or i686. I am
>>> thinking it's the for for i686 as I tried loading other linux distros
>>> for VIA on there before I got into allstar and they just plain sucked
>>> and didn't work for garbage.
>>>
>>> ~Benjamin, KB9LFZ
>>> allstar node 28569
>>>
>>>
>>> On Sun, 2013-06-23 at 20:50 -0500, Robert Garcia wrote:
>>> > All,
>>> >
>>> > I am looking for recommendations on small, preferably inexpensive,
>>> > systems that are capable of running on 12v to take advantage of the
>>> > redundant power systems at our sites.
>>> >
>>> > I would like it to support at least two nodes running simpleusb as I
>>> > don't need the DSP processing capabilities.  The idea is that these
>>> > systems would be connected to a port on an existing controller.
>>> >
>>> > I expect that HP thin clients are going to be my best bet, but there
>>> > seem to be many different models so I don't know where to begin.
>>> >
>>> > Suggestions or thoughts?
>>> >
>>> > Robert
>>> > N5QM
>>> > _______________________________________________
>>> > App_rpt-users mailing list
>>> > App_rpt-users at ohnosec.org
>>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>> ------------------------------
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>> --
>>> keith at goobie.org
>>> Keith Goobie
>>> Richmond Hill, ON, CANADA
>>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130626/17f3bffb/attachment.html>


More information about the App_rpt-users mailing list