[App_rpt-users] Anyone Virtualizing?

[Michael Hebert]

The URI will not work with a virtual server.


On Wed, Jun 26, 2013 at 1:18 PM, Jonathan Weirmeir <
jonathan.weirmeir at gmail.com> wrote:

> Just to be clear, I dumped IRLP a long time ago. Reasons include, but are
> not limited to, IRLP being a giant kludge. I'll save the IRLP bashing for
> another day.
>
> I like virtualizing for security reasons, as well as reducing the electric
> bill from having to run multiple different systems. I've had good results
> so far virtualizing with VirtualBox.
>
> Just wondering if AllStar plays well virtualized, especially with the URI
> and USB sound fobs.
>
> -J
>
>
> On Jun 26, 2013 1:16 PM, "Keith Goobie" <keith at goobie.org> wrote:
>
>>  Why virtualize (I am assuming you are thinking of a third party
>> product) – this is linux – a multi-tasking environment.  You can run both
>> on the same machine.
>>
>> Keith
>>
>>
>> On 6/26/13 1:11 PM, "Jonathan Weirmeir" <jonathan.weirmeir at gmail.com>
>> wrote:
>>
>> Hi, group!
>>
>> I'm new to app_rpt RoIP, coming from a background with IRLP.
>>
>> I'm wondering if anyone has ever tried virtualizing AllStar, and if so,
>> were there any issues.
>>
>> Thanks!
>>
>> Jonathan
>>
>> On Jun 23, 2013 10:39 PM, "Benjamin L. Naber" <Benjamin at kb9lfz.com>
>> wrote:
>>
>> Robert,
>>
>> I am using a Neoware CA-22. It is both server and node on one machine. I
>> do not have any other machines for my allstar node. While watching top,
>> the CPU has yet to get busier than 0.4. It is using DSP for audio, and
>> runs without fail.
>>
>> It has 12Vdc input with a standard barrel plug. Not sure what the low
>> voltage cut-off is, but it runs fine on a SLA battery that just came
>> from an auto charger that goes to float after bulk charging brings it up
>> to 14.1V. The current draw varies, usually above 500mA at idle, and
>> about 750mA when I'm talking to or listening on the node.
>>
>> It has a 1GHz processor, 1GB RAM and 1GB flash drive. I used what I had,
>> but you will have space left over if you are only able to get 512MB RAM
>> and 512MB flash.
>>
>> I don't remember if I am using Limey Linux for VIA or i686. I am
>> thinking it's the for for i686 as I tried loading other linux distros
>> for VIA on there before I got into allstar and they just plain sucked
>> and didn't work for garbage.
>>
>> ~Benjamin, KB9LFZ
>> allstar node 28569
>>
>>
>> On Sun, 2013-06-23 at 20:50 -0500, Robert Garcia wrote:
>> > All,
>> >
>> > I am looking for recommendations on small, preferably inexpensive,
>> > systems that are capable of running on 12v to take advantage of the
>> > redundant power systems at our sites.
>> >
>> > I would like it to support at least two nodes running simpleusb as I
>> > don't need the DSP processing capabilities.  The idea is that these
>> > systems would be connected to a port on an existing controller.
>> >
>> > I expect that HP thin clients are going to be my best bet, but there
>> > seem to be many different models so I don't know where to begin.
>> >
>> > Suggestions or thoughts?
>> >
>> > Robert
>> > N5QM
>> > _______________________________________________
>> > App_rpt-users mailing list
>> > App_rpt-users at ohnosec.org
>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>> ------------------------------
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>> --
>> keith at goobie.org
>> Keith Goobie
>> Richmond Hill, ON, CANADA
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130626/3ed8417c/attachment.html>