[App_rpt-users] Fwd: Couple of issues...

Keith Goobie keith at goobie.org
Mon Mar 18 14:00:26 UTC 2013 

In my configuration, I have asterisk connected to an RLC-DSP404 controller.

Duplex=0 in my case and telemdefault is set to the default value (ie not in
rpt.conf).

This is working for us.

Keith / VA3YC


On 3/18/13 8:45 AM, "Tony KT9AC" <kt9ac at ameritech.net> wrote:

>    Put your callsign in the "Name" field, and leave zero (0) in the "Number"
> field. It will announce your callsign when you connect and disconnect.
>  
>  Make sure your telemetry is turned on (duplex > 0 and telemdefault not equal
> to 0).
>  
>  Tony
>  
>  
> On 3/18/2013 7:21 AM, Keith Goobie wrote:
>  
>  
>>  Re: [App_rpt-users] Fwd:  Couple of issues... Keith on the iaxrpt. I have
>> tried putting the call in the callerid spot in iaxrpt. But I still get ghost.
>> Is there something else I need to add to the iax.conf or extensions.conf to
>> pick that up?  I had it reading caller id but it was the number not the name.
>>   
>>  Hi Tim
>>  
>>  When I put in something other than the default, that callsign is announced
>> when connecting & disconnecting.
>>  All users use this id when logging in via iaxRPT.  If callerid is set, they
>> are announced.
>>  
>>  [ve3lsr]
>>  type=user
>>  context=radio-gui
>>  auth=md5
>>  secret=xxxxxxxxx
>>  host=dynamic
>>  disallow=all
>>  allow=ulaw
>>  allow=gsm
>>  transfer=no
>>  
>>  
>>  This is the pertinent stanza in extensions.conf.
>>  
>>  
>>  [radio-gui]
>>  exten=27211,1,Rpt,27211|X
>>  exten=29133,1,Rpt,29133|X
>>  exten=29154,1,Rpt,29154|X
>>  
>>  Hope this helps.
>>  
>>  Keith
>>  
>>  
>>  On 3/18/13 12:20 AM, "Tim Sawyer" <tim.sawyer at me.com> wrote:
>>  
>>   
>>> The settings from running simple-tune-menu (not simpleusb, that implies you
>>> are editing the file. Don't do that) should be near half scale which is
>>> around 500. Zero is not where you want the settings.
>>>  --
>>>  Tim
>>>  :wq
>>>  
>>>  On Mar 17, 2013, at 8:51 PM, Ryan Collier <kb8pmy at kb8pmy.net> wrote:
>>>  
>>>   
>>>> Thanks for all the information. Sorry I wrote this half a sleep lastnight.
>>>>   
>>>>  I should have never said anything about echolink. Echolink is not the main
>>>> link. Yes, asterisk is comtrolling the radios. (Repeater Interface). I have
>>>> ran simpleusb many many many times. In order for me to get good repeated
>>>> audio( meaning input radio, asterisk, to output radio) all the settings are
>>>> zero and I have to add resistors to the audio. Also, allison and cw iders
>>>> and loud and at the correct level. Echolink ( since it was mentioned) is
>>>> set at default. But for some reason on some links the audio coming though
>>>> the repeater tx radio is very low. I acutually have to turn the radio up.
>>>> But I do have to make sure I turn the radio back down before the local rx
>>>> audio or iders come across cause it will blow your radio away. Is there a
>>>> setting or something on the just the internet asterisk audio to bring it up
>>>> 3db? Like I said a few lines before, the local repeated audio is fine and
>>>> all the simpleusb setting are 0.
>>>>   
>>>>  Keith on the iaxrpt. I have tried putting the call in the callerid spot in
>>>> iaxrpt. But I still get ghost. Is there something else I need to add to the
>>>> iax.conf or extensions.conf to pick that up?  I had it reading caller id
>>>> but it was the number not the name.
>>>>   
>>>>  On the voicemail I can star 6 and then the extension number. I am guessing
>>>> not passing the DTMF tones is the problem now. But If I open that will it
>>>> pass through every link and rf that I have open? Or would it be better if
>>>> you can only read your email via sip or iax client?
>>>>   
>>>>  Ryan
>>>>  
>>>>  On Sat, Mar 16, 2013 at 11:15 AM, George Csahanin <george at dyb.com> wrote:
>>>>   
>>>>> To triple the comment, you sound like your general audio settings are bad.
>>>>> Echolink audio is nothing short of horrible, don't set up to that. If you
>>>>> set the repeater modulation as per the asterisk app_rpt setup procedure
>>>>> the audio will be fantastic. Except for echolink. In rpt.conf there are
>>>>> settings to increase/decrease audio levels to and from echolink. But good
>>>>> luck setting those, as far as I have seen there is no "standard" for
>>>>> Echolink. There is very definetly for the Asterisk/Allstar side.
>>>>>   
>>>>>  But another part of your comment makes me curious, is the computer
>>>>> running Asterisk the controller for the repeater? That's best but it
>>>>> sounds like you may have said computer connected to a repeater controller.
>>>>> All bets are off there. I say this because you suggest that the repeater
>>>>> audio is ok, but asterisk conncts are low. This suggests a repeater audio
>>>>> path that is different for loacl repeat audio and asterisk/allstar.
>>>>>   
>>>>>  GeorgeC
>>>>>  W2DB
>>>>>  2360 
>>>>>   
>>>>>> ----- Original Message -----
>>>>>>  From: Keith Goobie <mailto:keith at goobie.org>
>>>>>>  To: Ryan Collier <mailto:kb8pmy at kb8pmy.net>  ; app_rpt-users at ohnosec.org
>>>>>>  Sent: Saturday, March 16, 2013 8:57 AM
>>>>>>  Subject: Re: [App_rpt-users] Couple of issues...
>>>>>>  
>>>>>>  Ryan
>>>>>>  
>>>>>>  1. Another users suggested that you make sure that the Asterisk audio be
>>>>>> set-up first.   This is very good counsel.  Follow the procedures as
>>>>>> dictated in the allstarlink.org <http://allstarlink.org/>  web site.
>>>>>> Once that is complete, you can adjust the Echolink audio as a parameter
>>>>>> in the usbradio config file.   Look for erxgain and etxgain in rpt.conf.
>>>>>>  
>>>>>>  2. When the user sets up the iaxrpt client, the second tab in the
>>>>>> preferences allows the user to set his callsign.   Whne that is done, he
>>>>>> will be announced on the node.  If the user does not set this he connects
>>>>>> in a stealthy manner.  Otherwise if a value is set, then they are
>>>>>> announced during connects and disconnects.  If everyone follows this,
>>>>>> then you can move forward with a common userid and password.
>>>>>>  
>>>>>>  3. Where is your voicemail with respect to asterisk & the bare repeater.
>>>>>> You need to supply a little more detail, before people can respond.  I
>>>>>> think that you are looking to pass dtmf from a remote user to your
>>>>>> repeater so that they can get voicemail ­ but I am guessing that this is
>>>>>> what you are seeking.
>>>>>>  
>>>>>>  Cheers
>>>>>>  Keith / VA3YC
>>>>>>  
>>>>>>  
>>>>>>  On 3/15/13 11:31 PM, "Ryan Collier" <kb8pmy at kb8pmy.net
>>>>>> <http://kb8pmy@kb8pmy.net/> > wrote:
>>>>>>  
>>>>>>   
>>>>>>> Greetings,
>>>>>>>  
>>>>>>>  I have been working on the node the past couple of days.
>>>>>>>  
>>>>>>>  Here is my problems.
>>>>>>>  
>>>>>>>  1. The incoming echolink audio is fine the repeater audio is fine. But
>>>>>>> the incoming asterisk connects are low. Can I adjust that?
>>>>>>>  
>>>>>>>  2. When an iaxrpt user connects. I can not get the caller id out for
>>>>>>> that person. I have ,made everyone there own sign in. It is easier on
>>>>>>> me. Is there a way I can fix this?
>>>>>>>  
>>>>>>>  3. I have voicemail working ont he repeater. You can access it from RF.
>>>>>>> But I can not get it to the point where they can check there mail. I can
>>>>>>> not get login to voiccemailmain to work right. Can I get help on this
>>>>>>> also?
>>>>>>>  
>>>>>>>  73
>>>>>>>  Ryan
>>>>>>>  KB8PMY
>>>>>>>  
>>>>>>>  
>>>>>>>  
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>>  App_rpt-users mailing list
>>>>>>>  App_rpt-users at ohnosec.org <http://App_rpt-users@ohnosec.org/>
>>>>>>>  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>  
>>>>>>  
>>>>>  
>>>>  
>>>  
>>  
>>  -- 
>>  keith at goobie.org
>>  Keith Goobie
>>  Richmond Hill, ON, CANADA
>>   
>>   
>>  
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>  
>  
>  
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130318/5d575567/attachment.html>

More information about the App_rpt-users mailing list