[App_rpt-users] control of the tx tone

[Keith Goobie]

What about a startup macro?

Keith


On 5/3/13 8:26 PM, "Pierre Martel" <petem001 at hotmail.com> wrote:

> Thanks matt,
> 
> This would work, but is there a way to make it permanent?
> 
> like in rpt.conf or such?
> 
> 
> -----Message d'origine-----
> From: Matt Roberts
> Sent: Friday, May 03, 2013 7:56 PM
> To: Pierre Martel
> Cc: APP RPT
> Subject: Re: [App_rpt-users] control of the tx tone
> 
> 
> On May 3, 2013, at 7:35 PM, Pierre Martel <petem001 at hotmail.com> wrote:
> 
>> All is working ok, but I have a few friend that use my repeater with some
>> cross band repeater radio. And they have difficulty cutting in cause they
>> have to wait after the tail and ct. before there cross band repeat radio
>> give them the chance to tx back at the repeater.
>> 
>> On my old rc-210 we were able to stop encoding the ctcss tone while the
>> courtesy tone and tail of the repeater..So they were runnign ther xband
>> radio on tone squelch on rx and the tx on there side was fast and sharp.
>> 
>> Is there  a way to do the same with app_rpt?
> 
>> Yes! Take a look at cop commands 58 and 59.
> 
> *  58 - Tx CTCSS On Input only Enable
> *  59 - Tx CTCSS On Input only Disable
> 
> I have those commands defined so I can turn on and off using DTMF.
> 
> 
> Matt Roberts
> n9gmr at me.com
> Call Sign N9GMR
> Allstar 28142
> EchoLink 640860
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, ON, CANADA