[App_rpt-users] control of the tx tone

[pete M]

A start up macro is another good idea.

Just one question.. Does the startup macro run even when we do a reload from the asterisk CLI?


Envoyé de mon iPad

Le 3 May 2013 à 20:28, "Keith Goobie" <keith at goobie.org> a écrit :

> What about a startup macro?
> 
> Keith
> 
> 
> On 5/3/13 8:26 PM, "Pierre Martel" <petem001 at hotmail.com> wrote:
> 
>> Thanks matt,
>> 
>> This would work, but is there a way to make it permanent?
>> 
>> like in rpt.conf or such?
>> 
>> 
>> -----Message d'origine-----
>> From: Matt Roberts
>> Sent: Friday, May 03, 2013 7:56 PM
>> To: Pierre Martel
>> Cc: APP RPT
>> Subject: Re: [App_rpt-users] control of the tx tone
>> 
>> 
>> On May 3, 2013, at 7:35 PM, Pierre Martel <petem001 at hotmail.com> wrote:
>> 
>>> All is working ok, but I have a few friend that use my repeater with some
>>> cross band repeater radio. And they have difficulty cutting in cause they
>>> have to wait after the tail and ct. before there cross band repeat radio
>>> give them the chance to tx back at the repeater.
>>> 
>>> On my old rc-210 we were able to stop encoding the ctcss tone while the
>>> courtesy tone and tail of the repeater..So they were runnign ther xband
>>> radio on tone squelch on rx and the tx on there side was fast and sharp.
>>> 
>>> Is there  a way to do the same with app_rpt?
>> 
>>> Yes! Take a look at cop commands 58 and 59.
>> 
>> *  58 - Tx CTCSS On Input only Enable
>> *  59 - Tx CTCSS On Input only Disable
>> 
>> I have those commands defined so I can turn on and off using DTMF.
>> 
>> 
>> Matt Roberts
>> n9gmr at me.com
>> Call Sign N9GMR
>> Allstar 28142
>> EchoLink 640860
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> -- 
> keith at goobie.org
> Keith Goobie
> Richmond Hill, ON, CANADA
> 
>