[App_rpt-users] Dual PL Tone? Possible?

[Bob Roszkowski]

Hello Jon,

I did try what you mentioned and was able to get the repeater to key up on
two different PL tones. However, both tones did key up the link. I matched
all parameters in the usbradio.conf file and restarted.

Any ideas?

boB W5EVH
On Nov 6, 2013 6:57 AM, "Jon Rorke" <jrorke at cogeco.ca> wrote:

>  Yes App_Rpt does support multi tone. I have done it.
>
> If you use the defined default tone then your signal goes out over the
> repeater and any links connected.
>
> If you use one of the alternate tones defined then only the repeater works
> locally and your signal doesnt not go out on any connected links.
>
> [usbNODE#]
>
> hdwtype=0
> rxboost=1
> txboost=1
> rxctcssrelax=1
> txctcssdefault=103.5
> rxctcssfreqs=103.5,136.5,156.7
> txctcssfreqs=103.5,136.5,156.7
> ;rxctcssoverride=0
> ;carrierfrom=usbinvert
> carrierfrom=dsp
> ;ctcssfrom=no
> ctcssfrom=dsp
> rxdemod=flat
> txprelim=yes
> txlimonly=no
> txtoctype=phase
> txmixa=composite
> txmixb=no
> invertptt=0
> duplex=1
> rxondelay=0
> rxnoisefiltype=0
> eeprom=0
>
> #includeifexists custom/usbradio.conf
>
> From the above example from usbradio.conf you can see that the default
> tone is 103.5 but it will aslo work on 136.5 and 156.7.
>
> But if you use the non default tones it only works in local mode.
>
> Jon VA3RQ
>
>
>
>
> On 11/5/2013 11:02 PM, Robert A. Poff wrote:
>
> While it won't selectively route to network or local only, you can use
> multiple tones.
>
> Operating like a community repeater.
>
> In usbradio.conf (urd.conf for XIPAR), on the rxctcssfreqs and
> txctcssfreqs lines put the additional tones separated by commas.
>
> These of course need to be standard PL frequencies.
>
> Last year we needed to transition from 123.0 to 146.2. Ran both PLs for
> two months.
>
>
> --
> Sent from my Android phone with K-9 Mail.
> Please excuse my brevity and typing errors.
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131106/40d58611/attachment.html>