[App_rpt-users] Dual PL Tone? Possible?

[Jon Rorke]

Hmm, mine seems to work as I described. But I seem to remember that i 
had to do an update from the SVN to get it to work right.
Unless of course something got changed in the newer sw since then.
Jon VA3RQ
On 11/6/2013 12:43 PM, Bob Roszkowski wrote:
>
> Hello Jon,
>
> I did try what you mentioned and was able to get the repeater to key 
> up on two different PL tones. However, both tones did key up the link. 
> I matched all parameters in the usbradio.conf file and restarted.
>
> Any ideas?
>
> boB W5EVH
>
> On Nov 6, 2013 6:57 AM, "Jon Rorke" <jrorke at cogeco.ca 
> <mailto:jrorke at cogeco.ca>> wrote:
>
>     Yes App_Rpt does support multi tone. I have done it.
>
>     If you use the defined default tone then your signal goes out over
>     the repeater and any links connected.
>
>     If you use one of the alternate tones defined then only the
>     repeater works locally and your signal doesnt not go out on any
>     connected links.
>
>     [usbNODE#]
>
>     hdwtype=0
>     rxboost=1
>     txboost=1
>     rxctcssrelax=1
>     txctcssdefault=103.5
>     rxctcssfreqs=103.5,136.5,156.7
>     txctcssfreqs=103.5,136.5,156.7
>     ;rxctcssoverride=0
>     ;carrierfrom=usbinvert
>     carrierfrom=dsp
>     ;ctcssfrom=no
>     ctcssfrom=dsp
>     rxdemod=flat
>     txprelim=yes
>     txlimonly=no
>     txtoctype=phase
>     txmixa=composite
>     txmixb=no
>     invertptt=0
>     duplex=1
>     rxondelay=0
>     rxnoisefiltype=0
>     eeprom=0
>
>     #includeifexists custom/usbradio.conf
>
>     From the above example from usbradio.conf you can see that the
>     default tone is 103.5 but it will aslo work on 136.5 and 156.7.
>
>     But if you use the non default tones it only works in local mode.
>
>     Jon VA3RQ
>
>
>
>
>     On 11/5/2013 11:02 PM, Robert A. Poff wrote:
>>     While it won't selectively route to network or local only, you
>>     can use multiple tones.
>>
>>     Operating like a community repeater.
>>
>>     In usbradio.conf (urd.conf for XIPAR), on the rxctcssfreqs and
>>     txctcssfreqs lines put the additional tones separated by commas.
>>
>>     These of course need to be standard PL frequencies.
>>
>>     Last year we needed to transition from 123.0 to 146.2. Ran both
>>     PLs for two months.
>>
>>
>>     -- 
>>     Sent from my Android phone with K-9 Mail.
>>     Please excuse my brevity and typing errors.
>>
>>
>>     _______________________________________________
>>     App_rpt-users mailing list
>>     App_rpt-users at ohnosec.org  <mailto:App_rpt-users at ohnosec.org>
>>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>     http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131106/b798bc3b/attachment.html>