[App_rpt-users] XIPAR question
Johnny Keeker
cypresstower at yahoo.com
Sat Nov 9 04:04:04 UTC 2013
Lu;
as root~ The complete command is asterisk -rx reload
I should have mentioned, in case you havent come across this.
in my rpt.conf, telemetry=telemetry must be just that. I tried create 2 telemetry stanzas, one for
each registered node on that server. Doing so prevented me from using custom courtesy tones.
I only have one URI on that server. its possible that may have something to do with it, Im not sure.
I now only have one statement in both stanzas so both nodes share the telemetry stanza.
Its funny because I can have different functions and wait times per node but not telemetry.
example below is what didn't work until I changed both stanzas to telemetry=telemetry
[1999]
rxchannel = radio/usb
duplex = 2
functions = functions1999
telemetry=telemetry1999 ;this line was the error
macro=macro
startup_macro=
wait_times=wait-times1999
[2000]
rxchannel = radio/usb
duplex = 1
functions = functions2000
telemetry=telemetry2000 ;this line was the error wait_times=wait-times2000
macro=macro
startup_macro=
JK
From: Lu Vencl <vencl at att.net>
To: Johnny Keeker <cypresstower at yahoo.com>
Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Sent: Friday, November 8, 2013 9:20 PM
Subject: Re: [App_rpt-users] XIPAR question
Johnny,
The install is from an ISO that was downloaded last week so I assume it has the latest loads.
Restarts seem to have no effects.
No matter what I I out into the rpt.conf file, it will not change.
I notice you mention
asterisk -rx for which I have not tried yet. What does it do?Sent from my iPhone, Lu Vencl
On Nov 8, 2013, at 7:34 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
Lu;
>
>Im experiencing a similar glitch, but Its probably my doing.
>One of my nodes is in the Carolinas, Its Xipar centos6 Feb 2013 no updates.
>I can change the courtesy tones etc, on the fly using putty and the asterisk -rx reload
>command, or Freepbx and the update button, both methods works. On another node
>with centos6 Feb 2013, I ran the update scripts, and now I have to reboot linux in order
>for the telemetry 'courtesy tones' to take effect. ??? It use to work, the only thing I did
>different was update the node. Ive tried the asterisk -rx reload, the amportal kill/start,
>and Freepbx, I cant change the courtesy tones until I reboot the box. I was going to try
>reloading xipar without the updates this weekend. Could you post your results here?
>I would really like to know if a reboot works on your node. Thanks
>ps. I dont have echolink configures on any xipar nodes.
>
>JK
>
>
>From: Lu Vencl <vencl at att.net>
>To: app_rpt-users at ohnosec.org
>Sent: Friday, November 8, 2013 1:23 PM
>Subject: [App_rpt-users] XIPAR question
>
>
>
>I have a question regarding XIPAR telemetry (courtesy Tones) and Echolink Telemetry.
>Under ACID, I have always been able to tweak the courtesy tones to a custom set of tones I prefer.
>But when I try to make changes under the XIPAR build, it seems to ignore them completely and do it’s own set of courtesy tones.
>See example below.
>Also, for echolink, I have used eannmode=0 to completely inhibit echolink telemetry and for some reason the =0 is the same as =1.
>Is there a work around or a known bug with these two items?
>Thanks in advance.
>Lu, KA4EPS
>
>
>
>;idtalkover=|iid ; Talkover ID (optional) default is none
>unlinkedct=ct2 ; unlinked courtesy tone (optional) default is none
>remotect=ct3 ; remote linked courtesy tone (indicates a remote is in the list of links)
>linkunkeyct=ct8 ; sent when a transmission received over the link unkeys
>;nolocallinkct=0 ; Send unlinkedct instead if another local node is connected to this node (hosted on the same PC).
>;irplann=1 ; Default: 1 = Play IRLP connect and disconnect announcements
> ; 0 = Disable IRLP connect and disconnect announcements
>eannmode=0 ; Default: 1 = Say only node number on EchoLink connects
>nounkeyct=0
>holdofftelem=1 ; 2 = say phonetic call sign only on EchoLink connects
> ; 3 = say phonetic call sign and node number on EchoLink connects
>;connpgm=yourconnectprogram ; Default: Disabled. Execute a program you specify on connect.
> ; passes 2 command line arguments to your program:
> ; 1. node number in this stanza (us)
> ; 2. node number being connected to us (them)
>;discpgm=yourdisconnectprogram ; Default: Disabled. Execute a program you specify on disconnect.
> ; passes 2 command line arguments to your program:
> ; 1. node number in this stanza (us)
> ; 2. node number being disconnected from us (them)
>;linkactenable=0 ; Set to 1 to enable the link activity timer. Applicable to standard nodes only.
>;lnkacttime=1800 ; Link activity timer time in seconds.
>;lnkactmacro=*52 ; Function to execute when link activity timer expires.
>;lnkacttimerwarn=30seconds ; Message to play when the link activity timer has 30 seconds left.
>;remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable).
>;remote_timeout=3600 ; Session time out for remote base. (set to 0 to disable)
>
>; program and options to send information to stats server
>statpost_program=/usr/bin/wget,-q,--output-document=/dev/null
>statpost_url=http://stats.allstarlink.org/uhandler.php
>
>irxgain=-10 ; IRLP receive gain adjustment
> ; Note: Gain is in db-volts (20logVI/VO)
>itxgain=10 ; IRLP transmit gain adjustment
> ; Note: Gain is in db-volts (20logVI/VO)
>erxgain=-3 ; Echolink receive gain adjustment
> ; Note: Gain is in db-volts (20logVI/VO)
>etxgain=3 ; Echolink transmit gain adjustment
> ; Note: Gain is in db-volts (20logVI/VO)
>;telemnomdb=0 ; Telemetry Nominal Amplitude reference in dB
>telemduckdb=-12 ; Telemetry Ducking in dB when local or link voice tx in progress
>
>
>
>[telemetry]
>
>ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
>ct2=|t(2175,0,2,1112)(0,0,2,0)(2175,0,2,700)(0,0,99,0)(350,440,75,1048)
>ct3=|t(440,0,150,4096)
>ct4=|t(550,0,150,2048)
>ct5=|t(660,0,150,2048)
>ct6=|t(880,0,150,2048)
>ct7=|t(660,440,150,2048)
>ct8=|t(350,440,75,1048)(0,0,80,0)(350,440,75,1048)
>;ct8=|t(2175,0,2,1112)(0,0,2,0)(2175,0,2,700)(0,0,99,0)(350,440,75,1048)(0,0,80,0)(350,440,75,1048)
>;ct8=|t(2175,0,80,512)(0,0,5,0)(1950,0,40,1048)(0,0,5,0)(1850,0,40,1048)
>;ct8=|t(350,440,75,1048)(0,0,80,0)(350,440,75,1048)
>remotetx=|t(440,0,50,3000)(0,0,80,0)(350,0,50,3000)
>remotemon=|t(1209,0,50,2048)
>cmdmode=|t(900,903,200,2048)
>functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131108/6ebf0315/attachment.html>
More information about the App_rpt-users
mailing list