[App_rpt-users] XIPAR question
Kevin Custer
kuggie at kuggie.com
Sat Nov 9 14:57:25 UTC 2013
telemetry = telemetry
wait_times = wait-times
morse = morse
All are/were missing in XIPAR by default. Not sure why.
Kevin
> Well you hit it right on the nail! telemetry=telemetry was missing.
> Great catch! Not sure why it was, but I will let Steve know that the
> default file has that missing in the build.
>
> Now the only item left is the eannmode=0 not working as it should.
>
> Once I hear back from Steve / issue resolved, I will report back.
>
> Thanks and 73
>
> KA4EPS
>
> *From:*Johnny Keeker [mailto:cypresstower at yahoo.com]
> *Sent:* Friday, November 08, 2013 11:04 PM
> *To:* Lu Vencl; App_rpt Users
> *Subject:* Re: [App_rpt-users] XIPAR question
>
> Lu;
>
> as root~ The complete command is asterisk -rx reload
>
> I should have mentioned, in case you havent come across this.
>
> in my rpt.conf, telemetry=telemetry must be just that. I tried
> create 2 telemetry stanzas, one for
>
> each registered node on that server. Doing so prevented me from using
> custom courtesy tones.
>
> I only have one URI on that server. its possible that may have
> something to do with it, Im not sure.
>
> I now only have one statement in both stanzas so both nodes share the
> telemetry stanza.
>
> Its funny because I can have different functions and wait times per
> node but not telemetry.
>
> example below is what didn't work until I changed both stanzas to
> telemetry=telemetry
>
> [1999]
>
> rxchannel = radio/usb
>
> duplex = 2
>
> functions = functions1999
>
> telemetry=telemetry1999 ;this line was the error
>
> wait_times=wait-times1999
>
> macro=macro
>
> startup_macro=
>
> [2000]
>
> rxchannel = radio/usb
>
> duplex = 1
>
> functions = functions2000
>
> telemetry=telemetry2000 ;this line was the error
>
> wait_times=wait-times2000
>
> macro=macro
>
> startup_macro=
>
> JK
>
> *From:*Lu Vencl <vencl at att.net <mailto:vencl at att.net>>
> *To:* Johnny Keeker <cypresstower at yahoo.com
> <mailto:cypresstower at yahoo.com>>
> *Cc:* "app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>"
> <app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>>
> *Sent:* Friday, November 8, 2013 9:20 PM
> *Subject:* Re: [App_rpt-users] XIPAR question
>
> Johnny,
>
> The install is from an ISO that was downloaded last week so I assume
> it has the latest loads.
>
> Restarts seem to have no effects.
>
> No matter what I I out into the rpt.conf file, it will not change.
>
> I notice you mention
>
> asterisk -rx for which I have not tried yet. What does it do?
>
> Sent from my iPhone, Lu Vencl
>
>
> On Nov 8, 2013, at 7:34 PM, Johnny Keeker <cypresstower at yahoo.com
> <mailto:cypresstower at yahoo.com>> wrote:
>
> Lu;
>
> Im experiencing a similar glitch, but Its probably my doing.
>
> One of my nodes is in the Carolinas, Its Xipar centos6 Feb 2013 no
> updates.
>
> I can change the courtesy tones etc, on the fly using putty and
> the asterisk -rx reload
>
> command, or Freepbx and the update button, both methods works. On
> another node
>
> with centos6 Feb 2013, I ran the update scripts, and now I have to
> reboot linux in order
>
> for the telemetry 'courtesy tones' to take effect. ??? It use to
> work, the only thing I did
>
> different was update the node. Ive tried the asterisk -rx
> reload, the amportal kill/start,
>
> and Freepbx, I cant change the courtesy tones until I reboot the
> box. I was going to try
>
> reloading xipar without the updates this weekend. Could you post
> your results here?
>
> I would really like to know if a reboot works on your node. Thanks
>
> ps. I dont have echolink configures on any xipar nodes.
>
> JK
>
>
> *From:*Lu Vencl <vencl at att.net <mailto:vencl at att.net>>
> *To:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
> *Sent:* Friday, November 8, 2013 1:23 PM
> *Subject:* [App_rpt-users] XIPAR question
>
> I have a question regarding XIPAR telemetry (courtesy Tones) and
> Echolink Telemetry.
>
> Under ACID, I have always been able to tweak the courtesy tones to
> a custom set of tones I prefer.
>
> But when I try to make changes under the XIPAR build, it seems to
> ignore them completely and do it's own set of courtesy tones.
>
> See example below.
>
> Also, for echolink, I have used eannmode=0 to completely inhibit
> echolink telemetry and for some reason the =0 is the same as =1.
>
> Is there a work around or a known bug with these two items?
>
> Thanks in advance.
>
> Lu, KA4EPS
>
> ;idtalkover=|iid ; Talkover ID
> (optional) default is none
>
> unlinkedct=ct2 ; unlinked courtesy tone (optional) default
> is none
>
> remotect=ct3 ; remote linked courtesy tone (indicates a
> remote is in the list of links)
>
> linkunkeyct=ct8 ; sent when a
> transmission received over the link unkeys
>
> ;nolocallinkct=0 ; Send unlinkedct
> instead if another local node is connected to this node (hosted on
> the same PC).
>
> ;irplann=1 ; Default: 1 = Play
> IRLP connect and disconnect announcements
>
> ; 0 = Disable IRLP connect and disconnect
> announcements
>
> eannmode=0 ; Default: 1 = Say
> only node number on EchoLink connects
>
> nounkeyct=0
>
> holdofftelem=1 ; 2 = say phonetic call sign only
> on EchoLink connects
>
> ; 3 = say phonetic call sign and node number on
> EchoLink connects
>
> ;connpgm=yourconnectprogram ; Default: Disabled.
> Execute a program you specify on connect.
>
> ; passes 2 command line arguments to your program:
>
> ; 1. node number in this stanza (us)
>
> ; 2. node number being connected to us (them)
>
> ;discpgm=yourdisconnectprogram ; Default: Disabled.
> Execute a program you specify on disconnect.
>
> ; passes 2 command line arguments to your program:
>
> ; 1. node number in this stanza (us)
>
> ; 2. node number being disconnected from us (them)
>
> ;linkactenable=0 ; Set to 1 to enable
> the link activity timer. Applicable to standard nodes only.
>
> ;lnkacttime=1800 ; Link activity timer
> time in seconds.
>
> ;lnkactmacro=*52 ; Function to execute
> when link activity timer expires.
>
> ;lnkacttimerwarn=30seconds ; Message to play when the
> link activity timer has 30 seconds left.
>
> ;remote_inact_timeout=1800 ; Inactivity timer for
> remote base nodes only (set to 0 to disable).
>
> ;remote_timeout=3600 ; Session time out for
> remote base. (set to 0 to disable)
>
> ; program and options to send information to stats server
>
> statpost_program=/usr/bin/wget,-q,--output-document=/dev/null
>
> statpost_url=http://stats.allstarlink.org/uhandler.php
>
> irxgain=-10 ; IRLP receive gain adjustment
>
> ; Note: Gain is in
> db-volts (20logVI/VO)
>
> itxgain=10 ; IRLP transmit gain adjustment
>
> ; Note: Gain is in
> db-volts (20logVI/VO)
>
> erxgain=-3 ; Echolink receive gain
> adjustment
>
> ; Note: Gain is in
> db-volts (20logVI/VO)
>
> etxgain=3 ; Echolink transmit gain
> adjustment
>
> ; Note: Gain is in
> db-volts (20logVI/VO)
>
> ;telemnomdb=0 ; Telemetry Nominal Amplitude
> reference in dB
>
> telemduckdb=-12 ; Telemetry Ducking in dB when local
> or link voice tx in progress
>
> [telemetry]
>
> ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
>
> ct2=|t(2175,0,2,1112)(0,0,2,0)(2175,0,2,700)(0,0,99,0)(350,440,75,1048)
>
>
> ct3=|t(440,0,150,4096)
>
> ct4=|t(550,0,150,2048)
>
> ct5=|t(660,0,150,2048)
>
> ct6=|t(880,0,150,2048)
>
> ct7=|t(660,440,150,2048)
>
> ct8=|t(350,440,75,1048)(0,0,80,0)(350,440,75,1048)
>
> ;ct8=|t(2175,0,2,1112)(0,0,2,0)(2175,0,2,700)(0,0,99,0)(350,440,75,1048)(0,0,80,0)(350,440,75,1048)
>
> ;ct8=|t(2175,0,80,512)(0,0,5,0)(1950,0,40,1048)(0,0,5,0)(1850,0,40,1048)
>
> ;ct8=|t(350,440,75,1048)(0,0,80,0)(350,440,75,1048)
>
> remotetx=|t(440,0,50,3000)(0,0,80,0)(350,0,50,3000)
>
> remotemon=|t(1209,0,50,2048)
>
> cmdmode=|t(900,903,200,2048)
>
> functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 2013.0.3426 / Virus Database: 3222/6822 - Release Date: 11/09/13
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131109/34461ed5/attachment.html>
More information about the App_rpt-users
mailing list