[App_rpt-users] Advise for setup

[Doug Crompton]

If you are using incoming PL for the users to key the repeater then it should follow their transmitted signal. If you are looking at the output of the repeater and the repeater is setup to transmit PL then PL will be present whenever the repeater is keyed. You can't use the repeater output detected PL for Allstar. If you are at the repeater you can pickup the PL at the correct point. If you are using a remote link to the repeater then you will have to either modify the repeater so that its output PL follows the input or go to a two PL system where there is one output PL for the repeater and another follows the input. The second method allows repeater users to hear repeater ID's and courtesy tones and both methods stop those from going out over Allstar.
73 Doug
WA3DSP
http://www.crompton.com/hamradio


From: n5uxt at hotmail.com
To: keith at goobie.org; app_rpt-users at ohnosec.org
Date: Wed, 13 Nov 2013 08:48:29 -0600
Subject: Re: [App_rpt-users] Advise for setup


Re: [App_rpt-users] Advise for setup





Hi Keith,
 
 Yes the repeater is using PL 
but the PL does not drop with the COS/COR. It stays running the whole time 
including the squelch tail. This maybe on of the issues. 
 
73 de Angelo
 
PS: any configurations files you 
would like to share?

  ----- Original Message ----- 
  From: 
  Keith Goobie 
  
  To: Angelo Glorioso ; app_rpt mailing list 
  Sent: Wednesday, November 13, 2013 8:39 
  AM
  Subject: Re: [App_rpt-users] Advise for 
  setup
  
If you are using 
  PL on the repeater, they maybe some options for you.  If you are not 
  using PL, then you will have to look at options where a shorter squelch tail 
  is used.

We run similar setups here at some of sites – taking advantage 
  of PL to give the desired results.

We are using 
  USBradio.

Keith


On 11/13/13 9:01 AM, "Angelo Glorioso" 
  <n5uxt at hotmail.com> 
  wrote:


  Good All,

We have a 
    node coming up in Lake Charles, La and we are having issues. So, I am asking 
    for configurations suggestion.  First off, the Allstar node is not 
    going to be at the repeater site. It is at a remote 
    site.

It is running on GM300 
    with URI interface. The repeater has a long squelch tail of about 2 second. 
    I have tried to run with USB radio in half duplex mode  but the node 
    ends up ping ponging with the repeater in half duplex mode . 
    

Is it better to use 
    simpleusb or USBradio for this type of setup?? Should the repeater squelch 
    be reduced or turned off all together.

Please 
    offer a copy of either USBradio or simpleusb configuratio file pretty 
    please.

 
Any help would be 
    appreciated.

 
 
7 3 de 
    Angelo


    
    _______________________________________________
App_rpt-users 
    mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- 
keith at goobie.org
Keith Goobie
Richmond Hill, 
  ON, CANADA


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131113/78f27caf/attachment.html>