[App_rpt-users] Advise for setup

[Ross Johnson]

Re: [App_rpt-users] Advise for setupThe best option would be to modify the repeaters PL to only be active during cos/cor, You may be able to add a second tone but that could cause other audio issues, but I have seen it done with success. 

Good luck
Ross
www.kc7rjk.net


From: Angelo Glorioso 
Sent: Wednesday, November 13, 2013 6:48 AM
To: Keith Goobie ; app_rpt mailing list 
Subject: Re: [App_rpt-users] Advise for setup

Hi Keith,

Yes the repeater is using PL but the PL does not drop with the COS/COR. It stays running the whole time including the squelch tail. This maybe on of the issues. 

73 de Angelo

PS: any configurations files you would like to share?
  ----- Original Message ----- 
  From: Keith Goobie 
  To: Angelo Glorioso ; app_rpt mailing list 
  Sent: Wednesday, November 13, 2013 8:39 AM
  Subject: Re: [App_rpt-users] Advise for setup

  If you are using PL on the repeater, they maybe some options for you.  If you are not using PL, then you will have to look at options where a shorter squelch tail is used.

  We run similar setups here at some of sites – taking advantage of PL to give the desired results.

  We are using USBradio.

  Keith


  On 11/13/13 9:01 AM, "Angelo Glorioso" <n5uxt at hotmail.com> wrote:


    Good All,

    We have a node coming up in Lake Charles, La and we are having issues. So, I am asking for configurations suggestion.  First off, the Allstar node is not going to be at the repeater site. It is at a remote site.

    It is running on GM300 with URI interface. The repeater has a long squelch tail of about 2 second. I have tried to run with USB radio in half duplex mode  but the node ends up ping ponging with the repeater in half duplex mode . 

    Is it better to use simpleusb or USBradio for this type of setup?? Should the repeater squelch be reduced or turned off all together.

    Please offer a copy of either USBradio or simpleusb configuratio file pretty please.

     
    Any help would be appreciated.

     
     
    7 3 de Angelo


----------------------------------------------------------------------------
    _______________________________________________
    App_rpt-users mailing list
    wlmailhtml:App_rpt-users at ohnosec.org
    http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


  -- 
  wlmailhtml:keith at goobie.org
  Keith Goobie
  Richmond Hill, ON, CANADA



--------------------------------------------------------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131113/6ccd1302/attachment.html>