[App_rpt-users] radio-tune-menu error
Lee Dusbabek
n7ld at aol.com
Wed Nov 20 05:44:38 UTC 2013
I have had this problem before. If I wait a few minutes then it works.
Not sure why it cant open the device sometimes.
Lee
-----Original Message-----
From: Benjamin L. Naber <Benjamin at kb9lfz.com>
To: Tim Sawyer <tim.sawyer at mac.com>
Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
Sent: Tue, Nov 19, 2013 5:42 pm
Subject: Re: [App_rpt-users] radio-tune-menu error
with fake usbradio_tune_usb29572.conf in place...
[Nov 19 17:39:59] NOTICE[1500]: app_rpt.c:22002 rpt_master: RPT thread
restarted on 29572
[Nov 19 17:39:59] WARNING[1500]: app_rpt.c:22014 rpt_master: rpt_thread
restarted on node 29572
[Nov 19 17:39:59] WARNING[1544]: channel.c:3051 ast_request: No channel
type registered for 'Zap'
rpt:Sorry unable to obtain pseudo channel
[Nov 19 17:39:59] WARNING[1545]: chan_usbradio.c:1728 hidthread: Loaded
parameters from usbradio_tune_usb29572.conf for device usb29572
On Tue, 2013-11-19 at 16:37 -0800, Tim Sawyer wrote:
> There is no console messages if you do 'asterisk -rvvv’? Is that what you mean
by log output?
> --
> Tim
> :wq
>
> On Nov 19, 2013, at 3:56 PM, Benjamin L. Naber <benjamin at kb9lfz.com> wrote:
>
> > Fail.
> >
> > Very frustrating with no log output.
> >
> > The settings on this machine are identical to my working node that uses
> > the Limey Linux for Intel.
> >
> > Mind you, I've made zero changes to rpt.conf. Only to usbradio.conf, and
> > that was to the node designation, which it is now back to what it was
> > after downloading the configs from the portal
> >
> > There are a few of you that do not have anything helpful. If you are
> > tempted to saying anything useful, save the electrons.
> >
> > ~Benjamin, KB9LFZ
> > Working limely linux i686 allstar node 28569
> >
> > my NOT working node RPT.conf:
> >
> > ; Radio Repeater configuration file (for use with app_rpt)
> > ;
> >
> >
> > ;
> > ; Your Repeater
> > ;
> >
> >
> > [29572] ; Change this to your assigned node number
> >
> > rxchannel=Radio/usb29572
> > duplex=1
> > erxgain=-3
> > etxgain=3
> > ;controlstates=controlstates
> > scheduler=schedule29572
> > morse=morse29572
> > macro=macro29572
> > functions=functions29572
> > phone_functions=functions29572
> > link_functions=functions29572
> > telemetry=telemetry
> > wait_times=wait-times
> > context = radio
> > callerid = "Repeater" <0000000000>
> > idrecording = |iKB9LFZ
> > accountcode=RADIO
> > hangtime=100
> > althangtime=100
> > totime=170000
> > idtime=540000
> > politeid=3000
> >
> > idtalkover=|iKB9LFZ
> > unlinkedct=ct2
> > remotect=ct3
> > linkunkeyct=ct8
> > ;nolocallinkct=0
> > ;eannmode=1
> > ;connpgm=yourconnectprogram
> > ;discpgm=yourdisconnectprogram
> > ;lnkactenable=0
> > ;lnkacttime=1800
> > ;lnkactmacro=*52
> > ;lnkacttimerwarn=30seconds
> > ;remote_inact_timeout=1800
> > ;remote_timeout=3600
> > nounkeyct=0
> > ;holdofftelem=0
> > beaconing=0
> > ;
> > ; *** Status Reporting ***
> > ;
> > ; Uncomment the either group following two statpost lines to report the
> > status of your node to stats.allstarlink.org
> > ; depending on whether you are running ACID or Limey Linux.
> >
> > ; ** For ACID ***
> > ;statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
> > ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status
> > updates
> >
> > ; ** For Limey Linux **
> > statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
> > statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
> >
> > ;
> > ; Morse code parameters, these are common to all repeaters.
> > ;
> >
> > [morse29572]
> >
> > speed=18
> > frequency=800
> > amplitude=4096
> > idfrequency=750
> > idamplitude=1024
> >
> > [schedule29572]
> > ;dtmf_function = m h dom mon dow ; ala cron, star is
> > implied
> >
> >
> > [functions29572]
> > 1=ilink,1
> > 2=ilink,2
> > 3=ilink,3
> > 4=ilink,4
> > 5=macro,1
> > 70=ilink,5
> > 71=ilink,6
> > 72=ilink,7
> > 73=ilink,15
> > 74=ilink,16
> > 75=ilink,8
> >
> > 80=status,1
> > 81=status,2
> >
> > 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
> > 0=autopatchdn ; Autopatch down
> >
> > ;989=cop,4
> > 980=status,3
> > 99=cop,6
> >
> > ; Place command macros here
> >
> > [macro29572]
> >
> >
> >
> >
> > ;[29567] ; Change this to your assigned node number
> >
> > ;rxchannel=Radio/usb29567
> > ;duplex=1
> > ;erxgain=-3
> > ;etxgain=3
> > ;controlstates=controlstates
> > ;scheduler=schedule29567
> > ;morse=morse29567
> > ;macro=macro29567
> > ;functions=functions29567
> > ;phone_functions=functions29567
> > ;link_functions=functions29567
> > ;telemetry=telemetry
> > ;wait_times=wait-times
> > ;context = radio
> > ;callerid = "Repeater" <0000000000>
> > ;idrecording = |iKB9LFZ
> > ;accountcode=RADIO
> > ;hangtime=100
> > ;althangtime=100
> > ;totime=170000
> > ;idtime=540000
> > ;politeid=3000
> >
> > ;idtalkover=|iKB9LFZ
> > ;unlinkedct=ct2
> > ;remotect=ct3
> > ;linkunkeyct=ct8
> > ;nolocallinkct=0
> > ;eannmode=1
> > ;connpgm=yourconnectprogram
> > ;discpgm=yourdisconnectprogram
> > ;lnkactenable=0
> > ;lnkacttime=1800
> > ;lnkactmacro=*52
> > ;lnkacttimerwarn=30seconds
> > ;remote_inact_timeout=1800
> > ;remote_timeout=3600
> > ;nounkeyct=0
> > ;holdofftelem=0
> > ;beaconing=0
> > ;
> > ; *** Status Reporting ***
> > ;
> > ; Uncomment the either group following two statpost lines to report the
> > status of your node to stats.allstarlink.org
> > ; depending on whether you are running ACID or Limey Linux.
> >
> > ; ** For ACID ***
> > ;statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
> > ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status
> > updates
> >
> > ; ** For Limey Linux **
> > ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
> > ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status
> > updates
> >
> > ;
> > ; Morse code parameters, these are common to all repeaters.
> > ;
> >
> > ;[morse29567]
> >
> > ;speed=18
> > ;frequency=800
> > ;amplitude=4096
> > ;idfrequency=750
> > ;idamplitude=1024
> >
> > ;[schedule29567]
> > ;dtmf_function = m h dom mon dow ; ala cron, star is
> > implied
> >
> >
> > ;[functions29567]
> > ;1=ilink,1
> > ;2=ilink,2
> > ;3=ilink,3
> > ;4=ilink,4
> > ;5=macro,1
> > ;70=ilink,5
> > ;71=ilink,6
> > ;72=ilink,7
> > ;73=ilink,15
> > ;74=ilink,16
> > ;75=ilink,8
> >
> > ;80=status,1
> > ;81=status,2
> >
> > ;6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
> > ;0=autopatchdn ; Autopatch down
> >
> > ;989=cop,4
> > ;980=status,3
> > 99=cop,6
> >
> > ; Place command macros here
> >
> > ;[macro29567]
> >
> >
> >
> > ;[telemetry]
> >
> > ;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
> > ;ct2=|t(660,880,150,2048)
> > ;ct3=|t(440,0,150,4096)
> > ;ct4=|t(550,0,150,2048)
> > ;ct5=|t(660,0,150,2048)
> > ;ct6=|t(880,0,150,2048)
> > ;ct7=|t(660,440,150,2048)
> > ;ct8=|t(700,1100,150,2048)
> > ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
> > ;remotemon=|t(1209,0,50,2048)
> > ;cmdmode=|t(900,903,200,2048)
> > ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
> > ;patchup=rpt/callproceeding
> > ;patchdown=rpt/callterminated
> >
> > ;
> > ; This section allows wait times for telemetry events to be adjusted
> > ; A section for wait times can be defined for every repeater
> > ;
> >
> > ;[wait-times]
> > ;telemwait=2000
> > ;idwait=500
> > ;unkeywait=2000
> > ;calltermwait=2000
> >
> > ;
> > ; This is where you define your nodes which cam be connected to.
> > ;
> >
> > [nodes]
> > ; Note, if you are using automatic update for allstar link nodes,
> > ; no allstar link nodes should be defined here. Only place a definition
> > ; for your locak nodes, and private (off of allstar link) nodes here.
> >
> > 29572 = radio at 127.0.0.1/29572,NONE
> > ;29567 = radio at 127.0.0.1/29567,NONE
> >
> > ; Memories for remote bases
> >
> > [memory]
> >
> > ;00 = 146.580,100.0,m
> > ;01 = 147.030,103.5,m+t
> > ;02 = 147.240,103.5,m+t
> > ;03 = 147.765,79.7,m-t
> > ;04 = 146.460,100.0,m
> > ;05 = 146.550,100.0,m
> >
> > #includeifexists custom/rpt.conf
> >
> > **** 29567 usbradio.conf*****
> >
> > ;
> > ; Usbradio channel driver Configuration File
> > ;
> >
> > [general]
> >
> > [usb29567]
> >
> > hdwtype=0
> > rxboost=1
> > txboost=0
> > rxctcssrelax=1
> > txctcssdefault=100.0
> > rxctcssfreqs=127.3
> > txctcssfreqs=127.3
> > ;rxctcssoverride=0
> > carrierfrom=dsp
> > ctcssfrom=dsp
> > rxdemod=flat
> > txprelim=no
> > txlimonly=no
> > txtoctype=no
> > txmixa=voice
> > txmixb=no
> > invertptt=0
> > duplex=0
> > rxondelay=0
> > rxnoisefiltype=0
> > eeprom=0
> >
> > ;[usb29572]
> >
> > ;hdwtype=0
> > ;rxboost=1
> > ;txboost=1
> > ;rxctcssrelax=1
> > ;txctcssdefault=100.0
> > ;rxctcssfreqs=100.0
> > ;txctcssfreqs=100.0
> > ;rxctcssoverride=0
> > ;carrierfrom=dsp
> > ;ctcssfrom=dsp
> > ;rxdemod=flat
> > ;txprelim=yes
> > ;txlimonly=no
> > ;txtoctype=notone
> > ;txmixa=composite
> > ;txmixb=0
> > ;invertptt=0
> > ;duplex=1
> > ;rxondelay=0
> > ;rxnoisefiltype=0
> > ;eeprom=0
> > //
> >
> > ; external paralle port pin usage
> > pp3 = ptt
> > pp4 = out0 ; aux 1
> > pp5 = out1 ; aux 2
> > pp6 = out2 ; aux 3
> > ; pp11 = cor
> >
> >
> >
> > #includeifexists custom/usbradio.conf
> >
> >
> > ********** zapata.conf *******
> >
> > ;
> > ; zapata.conf for systems with radiopci cards
> > ;
> >
> > [channels]
> >
> > signalling=em_txrx ; This needs to match the number of channels used in
> > zapata.conf and rpt.conf
> > ;channel = 1
> > ;channel = 2
> > ;channel = 3
> > ;channel = 4
> >
> > group=9
> > channel=pseudo
> >
> > ;
> > ; End of file
> > ;
> >
> > On Tue, 2013-11-19 at 13:36 -0800, Tim Sawyer wrote:
> >> The portal config does add the node number, usb[nodenumber], to the config
files like you said. But if you only have one usb device the [nodenumber] is not
needed because usb by itself is unique. If your older node was configured by
hand it’s likely to have only usb as the designation. Whatever the designation
in the usb config is, it has to match the rxchannel= in the node stanza of
rpt.conf.
> >>
> >> Be aware there are two possible usb config files; simpleusb and usbradio. I
looks like you are using usbradio but I thought I’d mention it just incase there
is a stray simpleusb.conf file on your system somehow.
> >> --
> >> Tim
> >> :wq
> >>
> >> On Nov 19, 2013, at 12:41 PM, Benjamin L. Naber <benjamin at kb9lfz.com>
wrote:
> >>
> >>> this is new to me.
> >>>
> >>> Some things have changed. I have not had these errors when installed and
> >>> setup my other two nodes in the first couple months of this year. I
> >>> downloaded the configs from the portal, did the radio-tune-menu, and it
> >>> went right to the menu on the other nodes.
> >>>
> >>> On the new node, I get:
> >>> Error parsing device parameters
> >>>
> >>> I'm comparing the new node stuff versus the old, and the only thing
> >>> different is the usb[nodenumber].
> >>>
> >>> I did a lsusb, saw the device was plugged in, and same info as the other
> >>> machine.
> >>>
> >>> ??????
> >>> ~Benjamin, K9LFZ
> >>>
> >>> _______________________________________________
> >>> App_rpt-users mailing list
> >>> App_rpt-users at ohnosec.org
> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >
> >
>
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131120/40676b94/attachment.html>
More information about the App_rpt-users
mailing list