[App_rpt-users] radio-tune-menu error
Chuck Henderson
rpt2 at chuck.midlandsnetworking.com
Wed Nov 20 07:11:37 UTC 2013
Today I tried using "radio-tune-menu" and would get similar errors and core
dumps. but using the Asterisk command line interface and "radio tune "
commands I had no problems,
Chuck WB9UUS
On Tue, Nov 19, 2013 at 11:44 PM, Lee Dusbabek <n7ld at aol.com> wrote:
> I have had this problem before. If I wait a few minutes then it works.
> Not sure why it cant open the device sometimes.
> Lee
>
> -----Original Message-----
> From: Benjamin L. Naber <Benjamin at kb9lfz.com>
> To: Tim Sawyer <tim.sawyer at mac.com>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Sent: Tue, Nov 19, 2013 5:42 pm
> Subject: Re: [App_rpt-users] radio-tune-menu error
>
> with fake usbradio_tune_usb29572.conf in place...
>
> [Nov 19 17:39:59] NOTICE[1500]: app_rpt.c:22002 rpt_master: RPT thread
> restarted on 29572
>
> [Nov 19 17:39:59] WARNING[1500]: app_rpt.c:22014 rpt_master: rpt_thread
> restarted on node 29572
>
> [Nov 19 17:39:59] WARNING[1544]: channel.c:3051 ast_request: No channel
> type registered for 'Zap'
>
> rpt:Sorry unable to obtain pseudo channel
>
> [Nov 19 17:39:59] WARNING[1545]: chan_usbradio.c:1728 hidthread: Loaded
> parameters from usbradio_tune_usb29572.conf for device usb29572
>
>
> On Tue, 2013-11-19 at 16:37 -0800, Tim Sawyer wrote:
> > There is no console messages if you do 'asterisk -rvvv’? Is that what you mean
> by log output?
> > --
> > Tim
> > :wq
> >
> > On Nov 19, 2013, at 3:56 PM, Benjamin L. Naber <benjamin at kb9lfz.com> wrote:
> >
> > > Fail.
> > >
> > > Very frustrating with no log output.
> > >
> > > The settings on this machine are identical to my working node that uses
> > > the Limey Linux for Intel.
> > >
> > > Mind you, I've made zero changes to rpt.conf. Only to usbradio.conf, and
> > > that was to the node designation, which it is now back to what it was
> > > after downloading the configs from the portal
> > >
> > > There are a few of you that do not have anything helpful. If you are
> > > tempted to saying anything useful, save the electrons.
> > >
> > > ~Benjamin, KB9LFZ
> > > Working limely linux i686 allstar node 28569
> > >
> > > my NOT working node RPT.conf:
> > >
> > > ; Radio Repeater configuration file (for use with app_rpt)
> > > ;
> > >
> > >
> > > ;
> > > ; Your Repeater
> > > ;
> > >
> > >
> > > [29572] ; Change this to your assigned node number
> > >
> > > rxchannel=Radio/usb29572
> > > duplex=1
> > > erxgain=-3
> > > etxgain=3
> > > ;controlstates=controlstates
> > > scheduler=schedule29572
> > > morse=morse29572
> > > macro=macro29572
> > > functions=functions29572
> > > phone_functions=functions29572
> > > link_functions=functions29572
> > > telemetry=telemetry
> > > wait_times=wait-times
> > > context = radio
> > > callerid = "Repeater" <0000000000>
> > > idrecording = |iKB9LFZ
> > > accountcode=RADIO
> > > hangtime=100
> > > althangtime=100
> > > totime=170000
> > > idtime=540000
> > > politeid=3000
> > >
> > > idtalkover=|iKB9LFZ
> > > unlinkedct=ct2
> > > remotect=ct3
> > > linkunkeyct=ct8
> > > ;nolocallinkct=0
> > > ;eannmode=1
> > > ;connpgm=yourconnectprogram
> > > ;discpgm=yourdisconnectprogram
> > > ;lnkactenable=0
> > > ;lnkacttime=1800
> > > ;lnkactmacro=*52
> > > ;lnkacttimerwarn=30seconds
> > > ;remote_inact_timeout=1800
> > > ;remote_timeout=3600
> > > nounkeyct=0
> > > ;holdofftelem=0
> > > beaconing=0
> > > ;
> > > ; *** Status Reporting ***
> > > ;
> > > ; Uncomment the either group following two statpost lines to report the
> > > status of your node to stats.allstarlink.org
> > > ; depending on whether you are running ACID or Limey Linux.
> > >
> > > ; ** For ACID ***
> > > ;statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
>
> > > ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status
> > > updates
> > >
> > > ; ** For Limey Linux **
> > > statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
>
> > > statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
> > >
> > > ;
> > > ; Morse code parameters, these are common to all repeaters.
> > > ;
> > >
> > > [morse29572]
> > >
> > > speed=18
> > > frequency=800
> > > amplitude=4096
> > > idfrequency=750
> > > idamplitude=1024
> > >
> > > [schedule29572]
>
> > > ;dtmf_function = m h dom mon dow ; ala cron, star is
> > > implied
> > >
> > >
> > > [functions29572]
> > > 1=ilink,1
> > > 2=ilink,2
> > > 3=ilink,3
> > > 4=ilink,4
> > > 5=macro,1
> > > 70=ilink,5
> > > 71=ilink,6
> > > 72=ilink,7
> > > 73=ilink,15
> > > 74=ilink,16
> > > 75=ilink,8
> > >
> > > 80=status,1
> > > 81=status,2
> > >
> > > 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
> > > 0=autopatchdn ; Autopatch down
> > >
> > > ;989=cop,4
> > > 980=status,3
> > > 99=cop,6
> > >
> > > ; Place command macros here
> > >
> > > [macro29572]
> > >
> > >
> > >
> > >
> > > ;[29567] ; Change this to your assigned node number
> > >
> > > ;rxchannel=Radio/usb29567
> > > ;duplex=1
> > > ;erxgain=-3
> > > ;etxgain=3
> > > ;controlstates=controlstates
> > > ;scheduler=schedule29567
> > > ;morse=morse29567
> > > ;macro=macro29567
> > > ;functions=functions29567
> > > ;phone_functions=functions29567
> > > ;link_functions=functions29567
> > > ;telemetry=telemetry
> > > ;wait_times=wait-times
> > > ;context = radio
> > > ;callerid = "Repeater" <0000000000>
> > > ;idrecording = |iKB9LFZ
> > > ;accountcode=RADIO
> > > ;hangtime=100
> > > ;althangtime=100
> > > ;totime=170000
> > > ;idtime=540000
> > > ;politeid=3000
> > >
> > > ;idtalkover=|iKB9LFZ
> > > ;unlinkedct=ct2
> > > ;remotect=ct3
> > > ;linkunkeyct=ct8
> > > ;nolocallinkct=0
> > > ;eannmode=1
> > > ;connpgm=yourconnectprogram
> > > ;discpgm=yourdisconnectprogram
> > > ;lnkactenable=0
> > > ;lnkacttime=1800
> > > ;lnkactmacro=*52
> > > ;lnkacttimerwarn=30seconds
> > > ;remote_inact_timeout=1800
> > > ;remote_timeout=3600
> > > ;nounkeyct=0
> > > ;holdofftelem=0
> > > ;beaconing=0
> > > ;
> > > ; *** Status Reporting ***
> > > ;
> > > ; Uncomment the either group following two statpost lines to report the
> > > status of your node to stats.allstarlink.org
> > > ; depending on whether you are running ACID or Limey Linux.
> > >
> > > ; ** For ACID ***
> > > ;statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
>
> > > ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status
> > > updates
> > >
> > > ; ** For Limey Linux **
> > > ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
>
> > > ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status
> > > updates
> > >
> > > ;
> > > ; Morse code parameters, these are common to all repeaters.
> > > ;
> > >
> > > ;[morse29567]
> > >
> > > ;speed=18
> > > ;frequency=800
> > > ;amplitude=4096
> > > ;idfrequency=750
> > > ;idamplitude=1024
> > >
> > > ;[schedule29567]
>
> > > ;dtmf_function = m h dom mon dow ; ala cron, star is
> > > implied
> > >
> > >
> > > ;[functions29567]
> > > ;1=ilink,1
> > > ;2=ilink,2
> > > ;3=ilink,3
> > > ;4=ilink,4
> > > ;5=macro,1
> > > ;70=ilink,5
> > > ;71=ilink,6
> > > ;72=ilink,7
> > > ;73=ilink,15
> > > ;74=ilink,16
> > > ;75=ilink,8
> > >
> > > ;80=status,1
> > > ;81=status,2
> > >
> > > ;6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
> > > ;0=autopatchdn ; Autopatch down
> > >
> > > ;989=cop,4
> > > ;980=status,3
> > > 99=cop,6
> > >
> > > ; Place command macros here
> > >
> > > ;[macro29567]
> > >
> > >
> > >
> > > ;[telemetry]
> > >
> > > ;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
> > > ;ct2=|t(660,880,150,2048)
> > > ;ct3=|t(440,0,150,4096)
> > > ;ct4=|t(550,0,150,2048)
> > > ;ct5=|t(660,0,150,2048)
> > > ;ct6=|t(880,0,150,2048)
> > > ;ct7=|t(660,440,150,2048)
> > > ;ct8=|t(700,1100,150,2048)
> > > ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
> > > ;remotemon=|t(1209,0,50,2048)
> > > ;cmdmode=|t(900,903,200,2048)
> > > ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
> > > ;patchup=rpt/callproceeding
> > > ;patchdown=rpt/callterminated
> > >
> > > ;
> > > ; This section allows wait times for telemetry events to be adjusted
> > > ; A section for wait times can be defined for every repeater
> > > ;
> > >
> > > ;[wait-times]
>
> > > ;telemwait=2000
> > > ;idwait=500
> > > ;unkeywait=2000
> > > ;calltermwait=2000
> > >
> > > ;
> > > ; This is where you define your nodes which cam be connected to.
> > > ;
> > >
> > > [nodes]
> > > ; Note, if you are using automatic update for allstar link nodes,
> > > ; no allstar link nodes should be defined here. Only place a definition
> > > ; for your locak nodes, and private (off of allstar link) nodes here.
> > >
> > > 29572 = radio at 127.0.0.1/29572,NONE
> > > ;29567 = radio at 127.0.0.1/29567,NONE
> > >
> > > ; Memories for remote bases
> > >
> > > [memory]
> > >
> > > ;00 = 146.580,100.0,m
> > > ;01 = 147.030,103.5,m+t
> > > ;02 = 147.240,103.5,m+t
> > > ;03 = 147.765,79.7,m-t
> > > ;04 = 146.460,100.0,m
> > > ;05 = 146.550,100.0,m
> > >
> > > #includeifexists custom/rpt.conf
> > >
> > > **** 29567 usbradio.conf*****
> > >
> > > ;
> > > ; Usbradio channel driver Configuration File
> > > ;
> > >
> > > [general]
> > >
> > > [usb29567]
> > >
> > > hdwtype=0
> > > rxboost=1
> > > txboost=0
> > > rxctcssrelax=1
> > > txctcssdefault=100.0
> > > rxctcssfreqs=127.3
> > > txctcssfreqs=127.3
> > > ;rxctcssoverride=0
> > > carrierfrom=dsp
> > > ctcssfrom=dsp
> > > rxdemod=flat
> > > txprelim=no
> > > txlimonly=no
> > > txtoctype=no
> > > txmixa=voice
> > > txmixb=no
> > > invertptt=0
> > > duplex=0
> > > rxondelay=0
> > > rxnoisefiltype=0
> > > eeprom=0
> > >
> > > ;[usb29572]
> > >
> > > ;hdwtype=0
> > > ;rxboost=1
> > > ;txboost=1
> > > ;rxctcssrelax=1
> > > ;txctcssdefault=100.0
> > > ;rxctcssfreqs=100.0
> > > ;txctcssfreqs=100.0
> > > ;rxctcssoverride=0
> > > ;carrierfrom=dsp
> > > ;ctcssfrom=dsp
> > > ;rxdemod=flat
> > > ;txprelim=yes
> > > ;txlimonly=no
> > > ;txtoctype=notone
> > > ;txmixa=composite
> > > ;txmixb=0
> > > ;invertptt=0
> > > ;duplex=1
> > > ;rxondelay=0
> > > ;rxnoisefiltype=0
> > > ;eeprom=0
> > > //
> > >
> > > ; external paralle port pin usage
> > > pp3 = ptt
> > > pp4 = out0 ; aux 1
> > > pp5 = out1 ; aux 2
> > > pp6 = out2 ; aux 3
> > > ; pp11 = cor
> > >
> > >
> > >
> > > #includeifexists custom/usbradio.conf
> > >
> > >
> > > ********** zapata.conf *******
> > >
> > > ;
> > > ; zapata.conf for systems with radiopci cards
> > > ;
> > >
> > > [channels]
> > >
> > > signalling=em_txrx ; This needs to match the number of channels used in
> > > zapata.conf and rpt.conf
> > > ;channel = 1
> > > ;channel = 2
> > > ;channel = 3
> > > ;channel = 4
> > >
> > > group=9
> > > channel=pseudo
> > >
> > > ;
> > > ; End of file
> > > ;
> > >
> > > On Tue, 2013-11-19 at 13:36 -0800, Tim Sawyer wrote:
> > >> The portal config does add the node number, usb[nodenumber], to the config
> files like you said. But if you only have one usb device the [nodenumber] is not
> needed because usb by itself is unique. If your older node was configured by
> hand it’s likely to have only usb as the designation. Whatever the designation
> in the usb config is, it has to match the rxchannel= in the node stanza of
> rpt.conf.
> > >>
> > >> Be aware there are two possible usb config files; simpleusb and usbradio. I
> looks like you are using usbradio but I thought I’d mention it just incase there
> is a stray simpleusb.conf file on your system somehow.
> > >> --
> > >> Tim
> > >> :wq
> > >>
> > >> On Nov 19, 2013, at 12:41 PM, Benjamin L. Naber <benjamin at kb9lfz.com>
> wrote:
> > >>
> > >>> this is new to me.
> > >>>
> > >>> Some things have changed. I have not had these errors when installed and
> > >>> setup my other two nodes in the first couple months of this year. I
> > >>> downloaded the configs from the portal, did the radio-tune-menu, and it
> > >>> went right to the menu on the other nodes.
> > >>>
> > >>> On the new node, I get:
> > >>> Error parsing device parameters
> > >>>
> > >>> I'm comparing the new node stuff versus the old, and the only thing
> > >>> different is the usb[nodenumber].
> > >>>
> > >>> I did a lsusb, saw the device was plugged in, and same info as the other
> > >>> machine.
> > >>>
> > >>> ??????
> > >>> ~Benjamin, K9LFZ
> > >>>
> > >>> _______________________________________________
> > >>> App_rpt-users mailing list
> > >>> App_rpt-users at ohnosec.org
> > >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >>
> > >
> > >
> >
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131120/9259fc19/attachment.html>
More information about the App_rpt-users
mailing list