[App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20

Scott Zimmerman n3xcc at repeater-builder.com
Fri Oct 11 16:56:06 UTC 2013


 > ... but have my eye on the RIM as it has advantages over the URI.
<-- We have several RB-RIMs in stock and ready to ship.

Scott

Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531

On 10/11/2013 12:43 PM, Johnny Keeker wrote:
> I don't know the device but if it has a CM108 or CM119 chip it will.
> Personally, I use startech sound fobs.They're easily modifiable
> using surface mount components and they're reliable. URI's are very
> good, but have my eye on the RIM as it has advantages over the URI.
> JK
> *From:* Richard Szajkowski <va3rzs at gmail.com>
> *To:* Johnny Keeker <cypresstower at yahoo.com>
> *Sent:* Friday, October 11, 2013 11:42 AM
> *Subject:* Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>
> Do you know if the signal link USB sound card would work ????  I have ordered a uri , but I was
> asked if I would host a node for another repeater
>
> Richard Szajkowski
>
>
> On Oct 10, 2013, at 8:31 PM, Johnny Keeker <cypresstower at yahoo.com <mailto:cypresstower at yahoo.com>>
> wrote:
>
>> At the least you have success.  It takes about 10 minutes or less, when you first boot
>> before your node reports to all the other on-linenodes. Some of my nodes
>> use a static IP and others DHCP with reserved address.  Let us all know how things
>> work out for you.
>> Good luck Richard
>> JK
>>
>> *From:* Richard Szajkowski <va3rzs at gmail.com <mailto:va3rzs at gmail.com>>
>> *To:* Johnny Keeker <cypresstower at yahoo.com <mailto:cypresstower at yahoo.com>>
>> *Sent:* Thursday, October 10, 2013 7:02 PM
>> *Subject:* Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>
>> I now have what I think is a working system ,
>>
>> For some reason it fails if I put in a static IP , but if I run with DHCP it finds the mic and runs
>>
>> If I tell it to pull down the info from the server for he node it dies
>>
>> I need it on a static IP for port fowarding , just like my other VoIP systems
>>
>> And I did do the info on the web portal to the best I can, I entered in all the info it requested
>>
>> I even got to install your device now , this will be here Tuesday because of our long weekend
>>
>> Thanks for all the help
>>
>> Richard Szajkowski
>>
>>
>> On Oct 10, 2013, at 6:31 PM, Johnny Keeker <cypresstower at yahoo.com
>> <mailto:cypresstower at yahoo.com>> wrote:
>>
>>> did you Not Create an installation disk????
>>> I thought you were past that point and sitting at the test prompt
>>> If you completed the ACID install and got the test prompt
>>> the password is 'setup'
>>> once your in root type passwd and change it
>>> nodesetup.sh   will run the script to push your node config files from the allstar server to
>>> your node "provided you created and saved the files prior to your ACID installation"
>>> JK
>>>
>>>
>>>
>>> *From:* "zeppelin.1 at netzero.com <mailto:zeppelin.1 at netzero.com>" <zeppelin.1 at netzero.com
>>> <mailto:zeppelin.1 at netzero.com>>
>>> *To:* app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
>>> *Sent:* Thursday, October 10, 2013 5:20 PM
>>> *Subject:* Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>>
>>> Hello Richard and welcome to the Linux world;
>>>                                                                   You "must" do a CD BURN to the
>>> ISO for it to work properly, low speed is best for older CD ROM.
>>> 73 Anton/ KC2RQR
>>> Node 29103
>>>
>>> ---------- Original Message ----------
>>> From: app_rpt-users-request at ohnosec.org <mailto:app_rpt-users-request at ohnosec.org>
>>> To: app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
>>> Subject: App_rpt-users Digest, Vol 56, Issue 20
>>> Date: Thu, 10 Oct 2013 12:00:01 -0400
>>>
>>> Send App_rpt-users mailing list submissions to
>>> app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> or, via email, send a message with subject or body 'help' to
>>> app_rpt-users-request at ohnosec.org <mailto:app_rpt-users-request at ohnosec.org>
>>>
>>> You can reach the person managing the list at
>>> app_rpt-users-owner at ohnosec.org <mailto:app_rpt-users-owner at ohnosec.org>
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of App_rpt-users digest..."
>>>
>>>
>>> Today's Topics:
>>>
>>>   1. Help with new install (Richard Szajkowski)
>>>
>>>
>>> ----------------------------------------------------------------------
>>>
>>> Message: 1
>>> Date: Wed, 9 Oct 2013 18:14:55 -0400
>>> From: Richard Szajkowski <va3rzs at gmail.com <mailto:va3rzs at gmail.com>>
>>> To: "app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>" <app_rpt-users at ohnosec.org
>>> <mailto:app_rpt-users at ohnosec.org>>
>>> Subject: [App_rpt-users] Help with new install
>>> Message-ID: <B2A7C8C9-28C3-4A33-8F56-558F97D69D7D at gmail.com
>>> <mailto:B2A7C8C9-28C3-4A33-8F56-558F97D69D7D at gmail.com>>
>>> Content-Type: text/plain; charset=us-ascii
>>>
>>> Hello to the group
>>>
>>> I am trying to get the computer on line while my interface is shipped
>>>
>>> I downloaded the ISO off the website , followed the prompts , I am not at a prompt
>>> Test >
>>>
>>> I did not enter a root password as I was not asked
>>>
>>> I can't find a PDF or anything on 1st time installs
>>>
>>> Any help would be great
>>>
>>> Thanks
>>>
>>> Richard Szajkowski va3rzs
>>>
>>>
>>>
>>> ------------------------------
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>> End of App_rpt-users Digest, Vol 56, Issue 20
>>> *********************************************
>>> ____________________________________________________________
>>> NetZero now offers 4G mobile broadband. Sign up now.
>>> <http://www.netzero.net/?refcd=NZINTISP0512T4GOUT1>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>



More information about the App_rpt-users mailing list