[App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20

Fri Oct 11 16:43:28 UTC 2013

I don't know the device but if it has a CM108 or CM119 chip it will.
Personally, I use startech sound fobs. They're easily modifiable 
using surface mount components and they're reliable. URI's are very
good, but have my eye on the RIM as it has advantages over the URI.
JK

From: Richard Szajkowski <va3rzs at gmail.com>
To: Johnny Keeker <cypresstower at yahoo.com> 
Sent: Friday, October 11, 2013 11:42 AM
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20

Do you know if the signal link USB sound card would work ????  I have ordered a uri , but I was asked if I would host a node for another repeater 

Richard Szajkowski 

On Oct 10, 2013, at 8:31 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:

At the least you have success.  It takes about 10 minutes or less, when you first boot
>before your node reports to all the other on-line nodes. Some of my nodes 
>use a static IP and others DHCP with reserved address.  Let us all know how things
>work out for you. 
>Good luck Richard
>JK
>
>
>From: Richard Szajkowski <va3rzs at gmail.com>
>To: Johnny Keeker <cypresstower at yahoo.com> 
>Sent: Thursday, October 10, 2013 7:02 PM
>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>
>
>
>I now have what I think is a working system , 
>
>
>For some reason it fails if I put in a static IP , but if I run with DHCP it finds the mic and runs 
>
>
>If I tell it to pull down the info from the server for he node it dies
>
>
>I need it on a static IP for port fowarding , just like my other VoIP systems 
>
>
>And I did do the info on the web portal to the best I can, I entered in all the info it requested 
>
>
>I even got to install your device now , this will be here Tuesday because of our long weekend 
>
>
>Thanks for all the help
>
>Richard Szajkowski 
>
>
>
>On Oct 10, 2013, at 6:31 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
>
>
>did you Not Create an installation disk???? 
>>I thought you were past that point and sitting at the test prompt
>>If you completed the ACID install and got the test prompt 
>>the password is 'setup' 
>>once your in root type passwd and change it 
>>nodesetup.sh   will run the script to push your node config files from the allstar server to 
>>your node "provided you created and saved the files prior to your ACID installation"
>>JK 
>>
>>
>>
>>
>>
>>
>>From: "zeppelin.1 at netzero.com" <zeppelin.1 at netzero.com>
>>To: app_rpt-users at ohnosec.org 
>>Sent: Thursday, October 10, 2013 5:20 PM
>>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>
>>
>>
>>Hello Richard and welcome to the Linux world;
>>                                                                  You "must" do a CD BURN to the ISO for it to work properly, low speed is best for older CD ROM.
>>73 Anton/ KC2RQR
>>Node 29103
>>
>>---------- Original Message ----------
>>From: app_rpt-users-request at ohnosec.org
>>To: app_rpt-users at ohnosec.org
>>Subject: App_rpt-users Digest, Vol 56, Issue 20
>>Date: Thu, 10 Oct 2013 12:00:01 -0400
>>
>>Send App_rpt-users mailing list submissions to
>>app_rpt-users at ohnosec.org
>>
>>To subscribe or unsubscribe via the World Wide Web, visit
>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>or, via email, send a message with subject or body 'help' to
>>app_rpt-users-request at ohnosec.org
>>
>>You can reach the person managing the list at
>>app_rpt-users-owner at ohnosec.org
>>
>>When replying, please edit your Subject line so it is more specific
>>than "Re: Contents of App_rpt-users digest..."
>>
>>
>>Today's Topics:
>>
>>  1. Help with new install (Richard Szajkowski)
>>
>>
>>----------------------------------------------------------------------
>>
>>Message: 1
>>Date: Wed, 9 Oct 2013 18:14:55 -0400
>>From: Richard Szajkowski <va3rzs at gmail.com>
>>To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
>>Subject: [App_rpt-users] Help with new install
>>Message-ID: <B2A7C8C9-28C3-4A33-8F56-558F97D69D7D at gmail.com>
>>Content-Type: text/plain; charset=us-ascii
>>
>>Hello to the group
>>
>>I am trying to get the computer on line while my interface is shipped 
>>
>>I downloaded the ISO off the website , followed the prompts , I am not at a prompt 
>>Test > 
>>
>>I did not enter a root password as I was not asked 
>>
>>I can't find a PDF or anything on 1st time installs 
>>
>>Any help would be great
>>
>>Thanks
>>
>>Richard Szajkowski va3rzs
>>
>>
>>
>>------------------------------
>>
>>_______________________________________________
>>App_rpt-users mailing list
>>App_rpt-users at ohnosec.org
>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>>End of App_rpt-users Digest, Vol 56, Issue 20
>>*********************************************
>>____________________________________________________________
>>NetZero now offers 4G mobile broadband. Sign up now.
>>_______________________________________________
>>App_rpt-users mailing list
>>App_rpt-users at ohnosec.org
>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>
>>
>_______________________________________________
>>App_rpt-users mailing list
>>App_rpt-users at ohnosec.org
>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131011/39e95025/attachment.html>