[App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20

Fri Oct 11 18:10:40 UTC 2013

instead of connecting a radio to your usb sound device connect it to your irlp node
>
should have mentioned, allstar is far superior to irlp and there is no allstar natzi out there YET
if you like allstar as much as I do, there is an orange button on the allstarlink.org site "ding ding"

I dont know any of the software guys, I just appreciate what they have created
(note) the above statements are my personal beliefs 

From: Richard Szajkowski <va3rzs at gmail.com>
To: Johnny Keeker <cypresstower at yahoo.com> 
Sent: Friday, October 11, 2013 1:55 PM
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20

So IRLP is now allowed ?? How do I set up ?  This would allow me 1computerin the shack and one link port , ummmmm

Richard Szajkowski 

On Oct 11, 2013, at 1:47 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:

Plug in your URI, RIM, or usb sound device and you will see it pop up on the linux screen
>as [root@~]  radio-tune-menu 
>the radio tune menu will allow you to setup your sound devices provided your .conf files are correct
>ACID is a repeater controller if you have 2 URIs or RIMs  you can bridge your IRLP node  
>beside IRLP configured on an ACID install had some audio level issues. Not sure about
>Xipar but it also had configs for IRLP.  I only tested it on ACID
>p.s. Scott I noticed you seen the publicizing for the RIM
>JK   
>
>
>From: Richard Szajkowski <va3rzs at gmail.com>
>To: Johnny Keeker <cypresstower at yahoo.com> 
>Cc: App_rpt Users <app_rpt-users at ohnosec.org> 
>Sent: Friday, October 11, 2013 1:06 PM
>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>
>
>
>How will I know if it works after I plug it in ? Is there a script that I need to run it install it 
>
>
>I am finding the docs out of date or not there at all (some links are dead like for the 4 port card)
>
>
>I know IRLP is not supported any more , sad as I run an IRLP node , and would have liked to run all 3 networks on one computer , to save a port for the 220 repeater 
>
>
>I thank you for all your help , 
>
>Richard Szajkowski 
>
>
>
>On Oct 11, 2013, at 12:43 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
>
>
>I don't know the device but if it has a CM108 or CM119 chip it will.
>>Personally, I use startech sound fobs. They're easily modifiable 
>>using surface mount components and they're reliable. URI's are very
>>good, but have my eye on the RIM as it has advantages over the URI.
>>JK
>>
>>From: Richard Szajkowski <va3rzs at gmail.com>
>>To: Johnny Keeker <cypresstower at yahoo.com> 
>>Sent: Friday, October 11, 2013 11:42 AM
>>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>
>>
>>
>>Do you know if the signal link USB sound card would work ????  I have ordered a uri , but I was asked if I would host a node for another repeater 
>>
>>Richard Szajkowski 
>>
>>
>>
>>On Oct 10, 2013, at 8:31 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
>>
>>
>>At the least you have success.  It takes about 10 minutes or less, when you first boot
>>>before your node reports to all the other on-line nodes. Some of my nodes 
>>>use a static IP and others DHCP with reserved address.  Let us all know how things
>>>work out for you. 
>>>Good luck Richard
>>>JK
>>>
>>>
>>>From: Richard Szajkowski <va3rzs at gmail.com>
>>>To: Johnny Keeker <cypresstower at yahoo.com> 
>>>Sent: Thursday, October 10, 2013 7:02 PM
>>>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>>
>>>
>>>
>>>I now have what I think is a working system , 
>>>
>>>
>>>For some reason it fails if I put in a static IP , but if I run with DHCP it finds the mic and runs 
>>>
>>>
>>>If I tell it to pull down the info from the server for he node it dies
>>>
>>>
>>>I need it on a static IP for port fowarding , just like my other VoIP systems 
>>>
>>>
>>>And I did do the info on the web portal to the best I can, I entered in all the info it requested 
>>>
>>>
>>>I even got to install your device now , this will be here Tuesday because of our long weekend 
>>>
>>>
>>>Thanks for all the help
>>>
>>>Richard Szajkowski 
>>>
>>>
>>>
>>>On Oct 10, 2013, at 6:31 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
>>>
>>>
>>>did you Not Create an installation disk???? 
>>>>I thought you were past that point and sitting at the test prompt
>>>>If you completed the ACID install and got the test prompt 
>>>>the password is 'setup' 
>>>>once your in root type passwd and change it 
>>>>nodesetup.sh   will run the script to push your node config files from the allstar server to 
>>>>your node "provided you created and saved the files prior to your ACID installation"
>>>>JK 
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>From: "zeppelin.1 at netzero.com" <zeppelin.1 at netzero.com>
>>>>To: app_rpt-users at ohnosec.org 
>>>>Sent: Thursday, October 10, 2013 5:20 PM
>>>>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>>>
>>>>
>>>>
>>>>Hello Richard and welcome to the Linux world;
>>>>                                                                  You "must" do a CD BURN to the ISO for it to work properly, low speed is best for older CD ROM.
>>>>73 Anton/ KC2RQR
>>>>Node 29103
>>>>
>>>>---------- Original Message ----------
>>>>From: app_rpt-users-request at ohnosec.org
>>>>To: app_rpt-users at ohnosec.org
>>>>Subject: App_rpt-users Digest, Vol 56, Issue 20
>>>>Date: Thu, 10 Oct 2013 12:00:01 -0400
>>>>
>>>>Send App_rpt-users mailing list submissions to
>>>>app_rpt-users at ohnosec.org
>>>>
>>>>To subscribe or unsubscribe via the World Wide Web, visit
>>>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>or, via email, send a message with subject or body 'help' to
>>>>app_rpt-users-request at ohnosec.org
>>>>
>>>>You can reach the person managing the list at
>>>>app_rpt-users-owner at ohnosec.org
>>>>
>>>>When replying, please edit your Subject line so it is more specific
>>>>than "Re: Contents of App_rpt-users digest..."
>>>>
>>>>
>>>>Today's Topics:
>>>>
>>>>  1. Help with new install (Richard Szajkowski)
>>>>
>>>>
>>>>----------------------------------------------------------------------
>>>>
>>>>Message: 1
>>>>Date: Wed, 9 Oct 2013 18:14:55 -0400
>>>>From: Richard Szajkowski <va3rzs at gmail.com>
>>>>To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
>>>>Subject: [App_rpt-users] Help with new install
>>>>Message-ID: <B2A7C8C9-28C3-4A33-8F56-558F97D69D7D at gmail.com>
>>>>Content-Type: text/plain; charset=us-ascii
>>>>
>>>>Hello to the group
>>>>
>>>>I am trying to get the computer on line while my interface is shipped 
>>>>
>>>>I downloaded the ISO off the website , followed the prompts , I am not at a prompt 
>>>>Test > 
>>>>
>>>>I did not enter a root password as I was not asked 
>>>>
>>>>I can't find a PDF or anything on 1st time installs 
>>>>
>>>>Any help would be great
>>>>
>>>>Thanks
>>>>
>>>>Richard Szajkowski va3rzs
>>>>
>>>>
>>>>
>>>>------------------------------
>>>>
>>>>_______________________________________________
>>>>App_rpt-users mailing list
>>>>App_rpt-users at ohnosec.org
>>>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>
>>>>End of App_rpt-users Digest, Vol 56, Issue 20
>>>>*********************************************
>>>>
>>>>____________________________________________________________
>>>>NetZero now offers 4G mobile broadband. Sign up now.
>>>>_______________________________________________
>>>>App_rpt-users mailing list
>>>>App_rpt-users at ohnosec.org
>>>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>>
>>>>
>>>_______________________________________________
>>>>App_rpt-users mailing list
>>>>App_rpt-users at ohnosec.org
>>>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131011/618470f7/attachment.html>