[App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
Johnny Keeker
cypresstower at yahoo.com
Fri Oct 11 20:07:54 UTC 2013
you ll need 2 allstar nodes on one server. once you have your irlp node attached
to one of those nodes, you call the "irlp, allstar node" and place it in command mode.
with a few rpt.conf changes the dtmf will be able to dial out on irlp. when you actually
get the hardware setup, drop a note on this site. myself or other Allstarians will be
glad to help out.
ACID is as powerful as any hardware repeater controller Ive ever owned, cat, scom, linksys, etc
JK
From: Richard Szajkowski <va3rzs at gmail.com>
To: Johnny Keeker <cypresstower at yahoo.com>
Sent: Friday, October 11, 2013 3:25 PM
Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
Not upset , just making a point , and I am talking about Dave C ,
All I did was buy his card , yes I did make a donation just like I have with DMR and I will with allstar once it's up and running , I believe in supporting systems I use
Please don't get me wrong your help and others have got me , what I believe is ready to install the interface if the powers that be had a interface to buy I am sure I would buy that one , witch would help support the project
This system has a lot to offer and a lot to learn , I will have to learn so I can teach the users
Again thank you for your help
Now the next question once we are running is how to unlink the IRLP port from the controller with allstar is up , and discont the allstar port when IRLP is up,
I am sure it's going to be a simple script for both
But for testing IRLP will just be closed so there is no problems with either network
Richard Szajkowski
On Oct 11, 2013, at 3:06 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
I didnt want to start a brag list, just trying to help do what I can.
>also dont want to patronize anyone, but there is a mindset on irlp, and like you,
>I still have a few irlp nodes. far as support for allstar, is right here
>one other difference, no one asks you for your $$$support, IRLP you pay up front.......
>sorry your not happy so ill quit the correspondence, hope your not offended.
>by the way, what Dave are you referring to???? 'you dont have to answer'
>JK
>
>From: Richard Szajkowski <va3rzs at gmail.com>
>To: Johnny Keeker <cypresstower at yahoo.com>
>Sent: Friday, October 11, 2013 2:39 PM
>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>
>
>
>I have been with IRLP from almost the start , I have had no problem with Dave or any of the crew
>
>
>I agree with radio to radio system , there are pros and cons
>
>
>I would not put echo link on my repeater because of the computer interface for a long time , it's sorta there now , have to put it back on line
>
>
>I also run a mototrbo system (DMR )
>
>
>We need allstar because of the RF link system has gone by the waste side ( was told the owner of the hardware has no interest in keeping the network up any more ) so a number of nets like canwarn has moved to allstar , we need to be connected in one form or another
>
>
>Support for IRLP is GREAT , support for DMR is GREAT, support for Echolink is good ,
>
>
>Support for allstar , lacking in a lot of spots I would have tossed it if it was not for a couple good people on this mailing list
>
>
>My point being the website is out of date , links are dead and point to sites for sale
>And really hard to find info, If I m wrong in my views ok,
>
>
>I find the portal GREAT !!!!!!!!!!!!! I just wish there was a read me for it so that when you get lost you have something to read and figure out what the heck you did
>
>
>I really believe all the VoIP systems have there pros and cons , I don't like d star and will never install a node , no real need to spend that kind of money , there is a node in the area and it does not get a great amount of use , so why bother
>
>
>The pro I can see for this system is I will provide access to my repeater , and if the club in the city wants a node I will do it for them as they don't have net access, and it's a short hop from my repeater site to there's , so no problem for me , I will even by the extra interface and use one of my spare radios to link to them
>
>
>This is a learning curve for me but happy to do it, and help a fellow club
>
>
>Btw our group has 2 members , we cover all costs our self , and ask nothing from anyone
>We run a total of 6 repeaters in different modes and freq.
>
>
>So I thank every one for there help in getting the 1st node up and running then move to the 2nd node
>
>
>
>
>
>Richard Szajkowski
>
>
>
>On Oct 11, 2013, at 2:10 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
>
>
>instead of connecting a radio to your usb sound device connect it to your irlp node
>>>
>>should have mentioned, allstar is far superior to irlp and there is no allstar natzi out there YET
>>if you like allstar as much as I do, there is an orange button on the allstarlink.org site "ding ding"
>>
>>I dont know any of the software guys, I just appreciate what they have created
>>(note) the above statements are my personal beliefs
>>
>>
>>From: Richard Szajkowski <va3rzs at gmail.com>
>>To: Johnny Keeker <cypresstower at yahoo.com>
>>Sent: Friday, October 11, 2013 1:55 PM
>>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>
>>
>>
>>So IRLP is now allowed ?? How do I set up ? This would allow me 1computerin the shack and one link port , ummmmm
>>
>>Richard Szajkowski
>>
>>
>>
>>On Oct 11, 2013, at 1:47 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
>>
>>
>>Plug in your URI, RIM, or usb sound device and you will see it pop up on the linux screen
>>>as [root@~] radio-tune-menu
>>>the radio tune menu will allow you to setup your sound devices provided your .conf files are correct
>>>ACID is a repeater controller if you have 2 URIs or RIMs you can bridge your IRLP node
>>>beside IRLP configured on an ACID install had some audio level issues. Not sure about
>>>Xipar but it also had configs for IRLP. I only tested it on ACID
>>>p.s. Scott I noticed you seen the publicizing for the RIM
>>>JK
>>>
>>>
>>>From: Richard Szajkowski <va3rzs at gmail.com>
>>>To: Johnny Keeker <cypresstower at yahoo.com>
>>>Cc: App_rpt Users <app_rpt-users at ohnosec.org>
>>>Sent: Friday, October 11, 2013 1:06 PM
>>>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>>
>>>
>>>
>>>How will I know if it works after I plug it in ? Is there a script that I need to run it install it
>>>
>>>
>>>I am finding the docs out of date or not there at all (some links are dead like for the 4 port card)
>>>
>>>
>>>I know IRLP is not supported any more , sad as I run an IRLP node , and would have liked to run all 3 networks on one computer , to save a port for the 220 repeater
>>>
>>>
>>>I thank you for all your help ,
>>>
>>>Richard Szajkowski
>>>
>>>
>>>
>>>On Oct 11, 2013, at 12:43 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
>>>
>>>
>>>I don't know the device but if it has a CM108 or CM119 chip it will.
>>>>Personally, I use startech sound fobs. They're easily modifiable
>>>>using surface mount components and they're reliable. URI's are very
>>>>good, but have my eye on the RIM as it has advantages over the URI.
>>>>JK
>>>>
>>>>From: Richard Szajkowski <va3rzs at gmail.com>
>>>>To: Johnny Keeker <cypresstower at yahoo.com>
>>>>Sent: Friday, October 11, 2013 11:42 AM
>>>>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>>>
>>>>
>>>>
>>>>Do you know if the signal link USB sound card would work ???? I have ordered a uri , but I was asked if I would host a node for another repeater
>>>>
>>>>Richard Szajkowski
>>>>
>>>>
>>>>
>>>>On Oct 10, 2013, at 8:31 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
>>>>
>>>>
>>>>At the least you have success. It takes about 10 minutes or less, when you first boot
>>>>>before your node reports to all the other on-line nodes. Some of my nodes
>>>>>use a static IP and others DHCP with reserved address. Let us all know how things
>>>>>work out for you.
>>>>>Good luck Richard
>>>>>JK
>>>>>
>>>>>
>>>>>From: Richard Szajkowski <va3rzs at gmail.com>
>>>>>To: Johnny Keeker <cypresstower at yahoo.com>
>>>>>Sent: Thursday, October 10, 2013 7:02 PM
>>>>>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>>>>
>>>>>
>>>>>
>>>>>I now have what I think is a working system ,
>>>>>
>>>>>
>>>>>For some reason it fails if I put in a static IP , but if I run with DHCP it finds the mic and runs
>>>>>
>>>>>
>>>>>If I tell it to pull down the info from the server for he node it dies
>>>>>
>>>>>
>>>>>I need it on a static IP for port fowarding , just like my other VoIP systems
>>>>>
>>>>>
>>>>>And I did do the info on the web portal to the best I can, I entered in all the info it requested
>>>>>
>>>>>
>>>>>I even got to install your device now , this will be here Tuesday because of our long weekend
>>>>>
>>>>>
>>>>>Thanks for all the help
>>>>>
>>>>>Richard Szajkowski
>>>>>
>>>>>
>>>>>
>>>>>On Oct 10, 2013, at 6:31 PM, Johnny Keeker <cypresstower at yahoo.com> wrote:
>>>>>
>>>>>
>>>>>did you Not Create an installation disk????
>>>>>>I thought you were past that point and sitting at the test prompt
>>>>>>If you completed the ACID install and got the test prompt
>>>>>>the password is 'setup'
>>>>>>once your in root type passwd and change it
>>>>>>nodesetup.sh will run the script to push your node config files from the allstar server to
>>>>>>your node "provided you created and saved the files prior to your ACID installation"
>>>>>>JK
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>From: "zeppelin.1 at netzero.com" <zeppelin.1 at netzero.com>
>>>>>>To: app_rpt-users at ohnosec.org
>>>>>>Sent: Thursday, October 10, 2013 5:20 PM
>>>>>>Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 56, Issue 20
>>>>>>
>>>>>>
>>>>>>
>>>>>>Hello Richard and welcome to the Linux world;
>>>>>> You "must" do a CD BURN to the ISO for it to work properly, low speed is best for older CD ROM.
>>>>>>73 Anton/ KC2RQR
>>>>>>Node 29103
>>>>>>
>>>>>>---------- Original Message ----------
>>>>>>From: app_rpt-users-request at ohnosec.org
>>>>>>To: app_rpt-users at ohnosec.org
>>>>>>Subject: App_rpt-users Digest, Vol 56, Issue 20
>>>>>>Date: Thu, 10 Oct 2013 12:00:01 -0400
>>>>>>
>>>>>>Send App_rpt-users mailing list submissions to
>>>>>>app_rpt-users at ohnosec.org
>>>>>>
>>>>>>To subscribe or unsubscribe via the World Wide Web, visit
>>>>>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>or, via email, send a message with subject or body 'help' to
>>>>>>app_rpt-users-request at ohnosec.org
>>>>>>
>>>>>>You can reach the person managing the list at
>>>>>>app_rpt-users-owner at ohnosec.org
>>>>>>
>>>>>>When replying, please edit your Subject line so it is more specific
>>>>>>than "Re: Contents of App_rpt-users digest..."
>>>>>>
>>>>>>
>>>>>>Today's Topics:
>>>>>>
>>>>>> 1. Help with new install (Richard Szajkowski)
>>>>>>
>>>>>>
>>>>>>----------------------------------------------------------------------
>>>>>>
>>>>>>Message: 1
>>>>>>Date: Wed, 9 Oct 2013 18:14:55 -0400
>>>>>>From: Richard Szajkowski <va3rzs at gmail.com>
>>>>>>To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
>>>>>>Subject: [App_rpt-users] Help with new install
>>>>>>Message-ID: <B2A7C8C9-28C3-4A33-8F56-558F97D69D7D at gmail.com>
>>>>>>Content-Type: text/plain; charset=us-ascii
>>>>>>
>>>>>>Hello to the group
>>>>>>
>>>>>>I am trying to get the computer on line while my interface is shipped
>>>>>>
>>>>>>I downloaded the ISO off the website , followed the prompts , I am not at a prompt
>>>>>>Test >
>>>>>>
>>>>>>I did not enter a root password as I was not asked
>>>>>>
>>>>>>I can't find a PDF or anything on 1st time installs
>>>>>>
>>>>>>Any help would be great
>>>>>>
>>>>>>Thanks
>>>>>>
>>>>>>Richard Szajkowski va3rzs
>>>>>>
>>>>>>
>>>>>>
>>>>>>------------------------------
>>>>>>
>>>>>>_______________________________________________
>>>>>>App_rpt-users mailing list
>>>>>>App_rpt-users at ohnosec.org
>>>>>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>>
>>>>>>End of App_rpt-users Digest, Vol 56, Issue 20
>>>>>>*********************************************
>>>>>>
>>>>>>____________________________________________________________
>>>>>>NetZero now offers 4G mobile broadband. Sign up now.
>>>>>>_______________________________________________
>>>>>>App_rpt-users mailing list
>>>>>>App_rpt-users at ohnosec.org
>>>>>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>>
>>>>>>
>>>>>_______________________________________________
>>>>>>App_rpt-users mailing list
>>>>>>App_rpt-users at ohnosec.org
>>>>>>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131011/d158a7d6/attachment.html>
More information about the App_rpt-users
mailing list