[App_rpt-users] Single RTCM with no GPS

[Richard Bopp]

I am trying to get a Single RTCM with no GPS to work in simple mode. Does
there need to be a gps for a timing source even if I am not using the
voting function at all?

I am getting this error in asterisks-
WARNING[2368]: chan_voter.c:4511 voter_reader: Voter client master timing
source mobile1 attempting to authenticate as mix client!!

_____________________
Here is my voter.conf-
[general]
port = 667
buflen = 500
password = DCA

[1995]
buflen = 800
mobile1 = DCAradios,transmit,nodeemp

________________________
Here is my rtcm conf-
1  - Serial # (1223) (which is MAC ADDR 00:04:A3:00:04:C7)
2  - VOTER Server Address (FQDN) (192.168.1.27)
3  - VOTER Server Port (667),  4  - Local Port (Override) (0)
5  - Client Password (DCAradios),  6  - Host Password (DCA)
7  - Tx Buffer Length (3000)
8  - GPS Data Protocol (0=NMEA, 1=TSIP) (0)
9  - GPS Serial Polarity (0=Non-Inverted, 1=Inverted) (0)
10 - GPS PPS Polarity (0=Non-Inverted, 1=Inverted, 2=NONE) (2)
11 - GPS Baud Rate (4800)
12 - External CTCSS (0=Ignore, 1=Non-Inverted, 2=Inverted) (1)
13 - COR Type (0=Normal, 1=IGNORE COR, 2=No Receiver) (1)
14 - Debug Level (4294967040)
15  - Alt. VOTER Server Address (FQDN) ()
16  - Alt. VOTER Server Port (Override) (0)
17  - DSP/BEW Mode NOT SUPPORTED
18 - "Duplex Mode 3" (0=DISABLED, 1-255 Hang Time) (1/10 secs) (255)
19 - Simulcast Launch Delay (65535) (approx 200 ns, 5 = 1us, > 0 to ENA SC)

Thanks,
Richard Bopp
Kc0npa
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20131025/a88bf3db/attachment.html>