[App_rpt-users] permit= echolink.conf

[Tim Sawyer]

Look at /usr/src/astsrc/asterisk/channels/chan_echolink.c

I'm no good at C but I have a stinking suspicion that increasing EL_MAX_CALL_LIST would allow both bigger permit and deny lists :-)
--
Tim
:wq

On Sep 5, 2013, at 11:25 AM, N7LD at aol.com wrote:

> Looks like I am having the same problem. Looks like the MAX stations is 30
> Lee
>  
>  
> In a message dated 5/21/2013 11:08:47 A.M. Pacific Daylight Time, w8jtw at yahoo.com writes:
> Is there anyway to increase the permit=  list in echolink.conf to work with more than 25 or so stations?  Once I get beyond 25 it does not want to allow beyond the first 25.  Or is there a way to limit to just USA connections? 
>     I dont want to run a wide open echolink but have many friends i don't want to block    need to have capacity of about 100 or so.
> 
> Thought of trying Permit=W*,N*,A*,K* not sure if that would limit to just US callsigns or not.
> 
> Any suggestions?
> 
> Thanks
> 
> Joe 
> W8JTW
> Node 27891  
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130905/e481d4ad/attachment.html>