[App_rpt-users] permit= echolink.conf

[N7LD at aol.com]

Thanks Tim, that worked!!!
Set mine to 60 and it works.
Lee
 
 
 
In a message dated 9/5/2013 4:58:21 P.M. Pacific Daylight Time,  
tim.sawyer at me.com writes:

Look at /usr/src/astsrc/asterisk/channels/chan_echolink.c


I'm no good at C but I have a stinking suspicion that  increasing 
EL_MAX_CALL_LIST would allow both bigger permit and deny lists  :-)
 
--
Tim
:wq



On Sep 5, 2013, at 11:25 AM, _N7LD at aol.com_ (mailto:N7LD at aol.com)  wrote:



Looks like I am having the same problem. Looks like the MAX stations is  30
Lee
 
 
 
In a message dated 5/21/2013 11:08:47 A.M. Pacific Daylight Time, 
_w8jtw at yahoo.com_ (mailto:w8jtw at yahoo.com)  writes:

Is there anyway to  increase the permit=  list in echolink.conf to work 
with more than 25  or so stations?  Once I get beyond 25 it does not want to 
allow  beyond the first 25.  Or is there a way to limit to just USA  
connections? 
I dont want to run a wide open echolink but  have many friends i don't want 
to block    need to have capacity  of about 100 or so.

Thought of trying Permit=W*,N*,A*,K* not sure  if that would limit to just 
US callsigns or not.

Any  suggestions?

Thanks

Joe 
W8JTW
Node 27891   
_______________________________________________
App_rpt-users  mailing list
_App_rpt-users at ohnosec.org_ (mailto:App_rpt-users at ohnosec.org) 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users



_______________________________________________
App_rpt-users  mailing list
_App_rpt-users at ohnosec.org_ (mailto:App_rpt-users at ohnosec.org) 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users





_______________________________________________
App_rpt-users  mailing  list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130905/1b827324/attachment.html>