[App_rpt-users] Lots of questions

[Robert Newberry]

OK so echolink...check!

What about using raspberry pi? I have a laptop I can dedicate, but the pi
looks appealing.

Apparare Scientior
Paratus Communicare
-N1XBM
On Sep 12, 2013 12:37 AM, "Tim Sawyer" <tim.sawyer at me.com> wrote:

> app_rpt has echolink built into it. See http://ohnosec.org/drupal/node/56
> --
> Tim
> :wq
>
> On Sep 11, 2013, at 12:14 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>
> I have a mastr ii repeater. I'd like to use app-rpt as the controller for
> the repeater. I'd like to be able to run echolink off the repeater. I also
> have a URI interface. I'd also like to after one repeater is on the air and
> available on echolink be able to do the same thing to another repeater to
> make a linked network via IP
>
> My questions are can echolink and app_rpt be run at the same time? At the
> same time providing repeater control and echolink service.
>
> Has anyone had any success using a raspberry pi with app_rpt and a URI? I
> have a laptop I could use, but the pi is an attractive solution.
>
> I'd also like to add I'm new to linux. I'm OK on computers and networking
> I also work in land mobile radio so the RF end of it I'm good.
>
> Apparare Scientior
> Paratus Communicare
> -N1XBM
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130912/98a7e6d2/attachment.html>