[App_rpt-users] Lots of questions

[Bryan D. Boyle]

popping the popcorn and sitting back...lol.

--
Bryan
Sent from my iPhone 5...small
keyboard, big fingers...please
forgive misspellings...



On Sep 12, 2013, at 15:50, Robert Newberry <N1XBM at amsat.org> wrote:

> OK so echolink...check!
> 
> What about using raspberry pi? I have a laptop I can dedicate, but the pi looks appealing.
> 
> Apparare Scientior 
> Paratus Communicare
> -N1XBM
> 
> On Sep 12, 2013 12:37 AM, "Tim Sawyer" <tim.sawyer at me.com> wrote:
>> app_rpt has echolink built into it. See http://ohnosec.org/drupal/node/56
>> --
>> Tim
>> :wq
>> 
>> On Sep 11, 2013, at 12:14 PM, Robert Newberry <N1XBM at amsat.org> wrote:
>> 
>>> I have a mastr ii repeater. I'd like to use app-rpt as the controller for the repeater. I'd like to be able to run echolink off the repeater. I also have a URI interface. I'd also like to after one repeater is on the air and available on echolink be able to do the same thing to another repeater to make a linked network via IP
>>> 
>>> My questions are can echolink and app_rpt be run at the same time? At the same time providing repeater control and echolink service.
>>> 
>>> Has anyone had any success using a raspberry pi with app_rpt and a URI? I have a laptop I could use, but the pi is an attractive solution.
>>> 
>>> I'd also like to add I'm new to linux. I'm OK on computers and networking I also work in land mobile radio so the RF end of it I'm good.
>>> 
>>> Apparare Scientior 
>>> Paratus Communicare
>>> -N1XBM
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130912/ed4f245e/attachment.html>