[App_rpt-users] Multi Node Voter questions

[Bill Hurlock]

Couple questions.

1.       In the Voter.conf file stanza. How do I handle the port= # as it relates to each of the nodes RTCMs. I assume they all stay on 667 and the login is based on the RTCM's naming convention i.e. sys1,sys2..... as to what node it becomes associated with as shown below.

2.       As long as everything is on the same private LAN than I only need ONE Master for all nodes on that server correct?

3.       I'm assuming as long as I'm connected to the same private network, I can still use IAXrpt to connect to each of the nodes as long as I list the correct IP addr in the Host field in IAXrtp and the correct user name and REM out the register- statement.

4.       Your Allmon would run off of a small Apachie server running somewhere on the private system.

I'm sure I'll have a couple more questions.
I just read your second reply and note that you have another Master in the 2532 node. I assume that is on a different LAN segment then the other nodes.

[general]
port = 667
buflen =180
password =xxxx

[1998]
Main Site = sys1,master,transmit
Remote 1 = sys2
Remote 2 = sys3

[1999]
Main Site = sys4,transmit
Remote 1 = sys5
Remote 2 = sys6

Bill Hurlock

From: Tim Sawyer [mailto:tim.sawyer at me.com]
Sent: Tuesday, September 17, 2013 10:13 AM
To: Bill Hurlock
Cc: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Multi Node Voter questions

Questions 1 and 3 are related. I have no recommendation but my Intel D525 is supporting 11 RTCM's consisting of 6 repeaters. It also supports Allmon (asterisk manager) polling and a few cron jobs. Top shows 90 to 95% idle.

Private networks are built with a) node numbers under 2000, b) no iax registration, c) no status reporting and d) the IP address of each of the other nodes is in the nodes stanza.
--
Tim
:wq

On Sep 17, 2013, at 4:38 AM, Bill Hurlock <bill.hurlock at cpcomms.com<mailto:bill.hurlock at cpcomms.com>> wrote:


I need to put together a private node network that has 12 separate repeaters with 2 voting sites each. The systems are all co located on one rooftop. The voter paths will be over Ubiquity rocket IP networks.
The questions are,
1.       How many nodes can be run on a single server with each node containing 1 main TX/RX and 2 voting sites?
2.       How do you config the nodes to not be part of the Allstar network?
3.       Is there a recommended PC configuration for a server , i.e. CPU speed, Memory, etc.?

Bill Hurlock
CPCommunications
856-234-1661 Office
856-264-1010<http://www.totalrf.com/> Cell
www.cpcomms.com<http://www.cpcomms.com/>
WA2TQI

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org<mailto:App_rpt-users at ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130917/6e6efb33/attachment.html>