[App_rpt-users] Multi Node Voter questions

Tue Sep 17 17:30:20 UTC 2013

And you should be able to share the same GPS for all RTCMs that are
co-located at the same sites.

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Tim Sawyer
Sent: Tuesday, September 17, 2013 12:36 PM
To: Sam Skolfield
Cc: Bill Hurlock; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Multi Node Voter questions

One master can support one or more nodes, each node with one or more
clients.  The master must be on the node with the RTCM that is on the same
ethernet segment as the server. Here's a sample config...

[general]

port = 667

password = xxxxxxx

[2521]

Blueridge = aaaa1,transmit

buflen = 500

[2529]

SanJuan = xxxx1,transmit

buflen = 500

plfilter = yes

[2531]

Santiago-UHF = rxxxy1,transmit

Lukens-UHF = rxxxy2,transmit

Sunset-UHF = rxxxy3,transmit

PV-UHF = rxxxy4,transmit

TestUHF = rxxxy5,nodeemp

buflen = 180

thresholds = 255,110=5

linger=15

txctcss = 136.5

txctcsslevel = 55

txtoctype = notone

;streams = 184.154.228.18:1667

;streams = wd6awp.net:1667

plfilter = yes

[2532]

Santiago = yyy1,transmit

Huntington = yyy2,master,transmit

PV = yyy3

Woodfern = yyy4

TestBench = yyy5,transmit

buflen = 200

thresholds = 255,110=5

linger=15

plfilter = yes

--
Tim
:wq

On Sep 17, 2013, at 8:06 AM, Sam Skolfield <kj6qfs at gmail.com> wrote:

Correct me if I am wrong, but an app_rpt server can only handle one master
timing source. Wouldn't that throw a wrench in the possibility of running
multiple voted nodes on one server?

On Tue, Sep 17, 2013 at 4:38 AM, Bill Hurlock <bill.hurlock at cpcomms.com>
wrote:

I need to put together a private node network that has 12 separate repeaters
with 2 voting sites each. The systems are all co located on one rooftop. The
voter paths will be over Ubiquity rocket IP networks.

The questions are, 

1.       How many nodes can be run on a single server with each node
containing 1 main TX/RX and 2 voting sites?

2.       How do you config the nodes to not be part of the Allstar network?

3.       Is there a recommended PC configuration for a server , i.e. CPU
speed, Memory, etc.?

Bill Hurlock

CPCommunications

856-234-1661 Office

 <http://www.totalrf.com/> 856-264-1010 Cell

 <http://www.cpcomms.com/> www.cpcomms.com

WA2TQI

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-- 
KJ6QFS
Sam Skolfield 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20130917/c06214b8/attachment.html>