[App_rpt-users] Allmon2 on pi remote web server

[Tim Sawyer]

Did you remember to set the bindaddr in manager.conf?

;bindaddr = 127.0.0.1   ; Local interface only!                                                           
bindaddr = 0.0.0.0


--
Tim
:wq

On Apr 11, 2014, at 4:54 AM, Mal Good <malgood at gmail.com> wrote:

> Hi
> 
> I am running a Beagle / LOX combination which is working well.  I have a
> Raspberry Pi running as a web server, which is also running fine!
> 
> What I would like to do is run Allmon2 on the web server.  This is where I
> am having difficulties.  Has anyone done this?  Or set up Allmon2 in a
> remote web server system?  If so can you let me know what you manager.conf
> setting are in Asterisk and also what you allmon.ini settings are? 
> 
> My router port forwarding setting, I think, are correct.
> 
> Any other help would be greatly appreciated.
> 
> 
> Mal
> VK6MT
> 
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.