[App_rpt-users] Acid install help

[Mark Cheavens]

For both of you, I would suggest that if you have a USB ethernet 
dongle try to install with it installed.
- That is the easiest solution that I use for network adapters that 
are not supported by the ACID install CD.

Sincerely,
Mark
KC5EVE

At 01:43 AM 4/15/2014, Bob wrote:
>I'm having the same difficulty only with a Gigabyte board. Looks 
>like the ACID CD does not have the correct driver for the NIC. After 
>the reboot, it tells me the cable is not connected, yet the lights 
>at both ends of the connectors are working. (Sigh!)
>
>Linux newbie as well,
>Bob
>kk6ecm
>
>
>
>
>----------
>From: app_rpt-users-bounces at ohnosec.org 
>[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of Barrett
>Sent: Monday, April 14, 2014 6:25 PM
>To: app_rpt-users at ohnosec.org
>Subject: [App_rpt-users] Acid install help
>
>Hello,
>
>
>   I am trying to install the Acid distribution of Allstar. The 
> computer is a ACER Aspire M1202-U1850A Desktop PC - AMD Athlon 
> LE-1640 2.6GHz, 2GB DDR2, 320GB HDD, DVDRW.  During installation 
> everything seems fine until the computer restarts and then ask to 
> remove media after that the computer will freeze at yum-updatesd 
> after a while it will tell me that I have no internet connection. 
> Now to be honest I am new to Linux. I did install Centos 6 as a 
> test and it had internet also I install a copy of debian and it 
> also had internet. I do have a IRLP node that I wish to convert 
> over to allstar. Could you please point me in the right direction 
> for installation? I ordered a usb sound fob and also an pci 
> parallel port. The port being for the irlp board ver 3.
>
>
>Thanks for your time and help.
>KG7CHJ
>40775
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>To unsubscribe from this list please visit 
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>down to the bottom of the page. Enter your email address and press 
>the "Unsubscribe or edit options button"
>You do not need a password to unsubscribe, you can do it via email 
>confirmation. If you have trouble unsubscribing, please send a 
>message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140415/3e2ef4c3/attachment.html>