[App_rpt-users] Acid install help

[Bob]

I finally received a reply from the board manufacture who said to boot from
bios for the lan... it worked. The load is up and running. Now on to my next
level of troubleshooting.

 

Thanks,

Bob

kk6ecm

 

  _____  

From: Kevin Custer [mailto:kuggie at kuggie.com] 
Sent: Tuesday, April 15, 2014 5:56 AM
To: Bob; app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] Acid install help

 

On 4/15/2014 2:43 AM, Bob wrote:

I'm having the same difficulty only with a Gigabyte board. Looks like the
ACID CD does not have the correct driver for the NIC. After the reboot, it
tells me the cable is not connected, yet the lights at both ends of the
connectors are working. (Sigh!)

 

Linux newbie as well,

Bob

kk6ecm



I've seen this with several computers that I have installed the software
(ACID - XIPAR) on.  What I do is take a NIC card and temporarily install it
while loading the box.  It seems that the installs always see the add-on NIC
and gets past the install.  Then you simply remove the added NIC and go
forward.

YMMV

Kevin Custer

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140415/7aeb050c/attachment.html>