[App_rpt-users] URI Audio Out

Bob kk6ecm at gmail.com
Sun Apr 20 15:29:18 UTC 2014


Performed URI loopback test. Digital all passed, all analog failed (sigh!).
Now I have to figure out why.

 

Thanks,

Bob

kk6ecm

  _____  

From: Bob [mailto:kk6ecm at gmail.com] 
Sent: Sunday, April 20, 2014 7:24 AM
To: 'app_rpt-users at ohnosec.org'
Subject: RE: URI Audio Out

 

Oops... forget the ramped dc offset... config error... there is no tone on
either LEFT_AC ro RIGHT_AC

 

I've tried it with a couple of URIs without success.

 

Thanks,

Bob

kk6ecm

 

  _____  

From: Bob [mailto:kk6ecm at gmail.com] 
Sent: Sunday, April 20, 2014 7:17 AM
To: 'app_rpt-users at ohnosec.org'
Subject: URI Audio Out

 

I'm testing a URI on a server with a scope connected

 

When I send audio to the URI (CLI> radio tune txvoice 500), PTT activates
the red LED (scope confirms), and the scope responds to the LEFT_AC start
and stop (ramped dc offset), but no tone. I've checked both channels.

 

I'm wondering if I have something set incorrectly. What am I missing? 

 

Here are my tx settings.

 

hdwtype=0     

txboost=1

txctcssfreqs=107.2

txprelim=no

txlimonly=no

txtoctype=notone

txmixa=composite

txmixb=composite

duplex=1

eeprom=0

 

Thanks,

Bob

kk6ecm

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140420/01478398/attachment.html>


More information about the App_rpt-users mailing list