[App_rpt-users] usbradio to simpleusb
Bob
kk6ecm at gmail.com
Sun Apr 27 05:12:19 UTC 2014
Very good. Since I'm using the same USB device, can I just copy over the
settings for simpleusb? Trying this approach because I discovered PL was
generated in the radio.
Thanks,
Bob
kk6ecm
_____
From: hotmail_97fc649978f54bf0 at live.com
[mailto:hotmail_97fc649978f54bf0 at live.com] On Behalf Of Doug Crompton
Sent: Saturday, April 26, 2014 9:54 PM
To: Bob
Cc: app_rpt-users at ohnosec.org
Subject: RE: [App_rpt-users] usbradio to simpleusb
simpleusb as its name implies depends on the radio to do much of the work.
The PL for RX and TX must be in the radio. The radios squelch is used. So
just worry about what needs to be setup in simpleusb.
You need RX and TX audio, PTT and COS. You can select whether PTT and/or COS
are inverted. Otherwise there is not much to setup. Just run the simpleusb
audio setup and you should be good to go.
If you can use simpleusb it works very well. I use it exclusively and so do
many others I know who run Allstar. Probably the reason more people don't
run it is because usbradio is the default config and it requires a COS
signal. Some people just like complication. I do not!
73 Doug
WA3DSP
http://www.crompton.com/hamradio
_____
From: kk6ecm at gmail.com
To: app_rpt-users at ohnosec.org
Date: Sat, 26 Apr 2014 21:15:01 -0700
Subject: Re: [App_rpt-users] usbradio to simpleusb
When moving from usbradio to simpleusb, I noticed there are more inputs in
usbradio_tune... compared to simpleusb_tune. What is the usbradio
"rxvoiceadj," and why is it not used in simpleusb?
thanks,
Bob
kk6ecm
_______________________________________________ App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
from this list please visit
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
the bottom of the page. Enter your email address and press the "Unsubscribe
or edit options button" You do not need a password to unsubscribe, you can
do it via email confirmation. If you have trouble unsubscribing, please send
a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140426/647e469b/attachment.html>
More information about the App_rpt-users
mailing list