[App_rpt-users] Simple I/O interface

[Skyler F]

Thanks. Do you know where I should put the events stanza? It said to paste
some code their in the rpt.conf, but I did not see any stanza their or any
example rpt.conf.

73
Skyler


On Sun, Aug 3, 2014 at 12:32 PM, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:

> the scripts are on the k0kn site Tim mentioned earlier; the schematic for
> the interface is on the dmk site.
>
>
> --
> Bryan
> Sent from my iPhone 5...No electrons were harmed in the sending of this
> message.
>
>
>
> On Aug 3, 2014, at 13:37, Skyler F <electricity440 at gmail.com> wrote:
>
> i can't find the scripts on dmkeng.com
>
>
> On Sun, Aug 3, 2014 at 11:05 AM, Bryan D. Boyle <bdboyle at bdboyle.com>
> wrote:
>
>> using kyle's scripts and the curcuit on the dmkeng.com website nicely
>> for a couple years.  No issues; start up at 20 sec into key up and run for
>> 2 min after.  off rest of time.
>>
>> --
>> Bryan
>> Sent from my iPhone 5...No electrons were harmed in the sending of this
>> message.
>>
>>
>>
>> On Aug 3, 2014, at 12:12, Tim Sawyer <tim.sawyer at mac.com> wrote:
>>
>> You’ll probably find a script here you can use or adapt:
>> http://www.qsl.net/k0kn/scripts.html
>>  --
>> Tim
>> :wq
>>
>> On Aug 3, 2014, at 9:06 AM, Skyler F <electricity440 at gmail.com> wrote:
>>
>> Hi,
>>
>> I have some cooling fans.
>>
>> I would like to have the fans turn ON when the radio transmits, and stay
>> on for sixty seconds after the radio stops transmitting and then turn off.
>>
>> I would like to use the I/O interface on my URIx. (The I/O will then
>> trigger a Solid State Relay ,and then turn on the Fans)
>>
>> How can I do this with the software? Can I write it with Scripts?
>>
>>  What commands would I need to detect if it is sending a PTT, detect PTT
>> off, wait time, turn the output to high, turn the output to low, always
>> "look" for a TX, etc.
>>
>> Example code is always really nice for a beginner like me :-)
>>
>> 73
>>
>> Skyler
>> KDØWHB
>>
>> --
>> Skyler Fennell
>> amsatnet.info
>> KDØWHB
>> electricity440 at gmail.com
>>  _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140804/82a3f062/attachment.html>