[App_rpt-users] Simple I/O interface

[Bryan D. Boyle]

the scripts are on the k0kn site Tim mentioned earlier; the schematic for the interface is on the dmk site.  

--
Bryan
Sent from my iPhone 5...No electrons were harmed in the sending of this message.



> On Aug 3, 2014, at 13:37, Skyler F <electricity440 at gmail.com> wrote:
> 
> i can't find the scripts on dmkeng.com
> 
> 
>> On Sun, Aug 3, 2014 at 11:05 AM, Bryan D. Boyle <bdboyle at bdboyle.com> wrote:
>> using kyle's scripts and the curcuit on the dmkeng.com website nicely for a couple years.  No issues; start up at 20 sec into key up and run for 2 min after.  off rest of time.
>> 
>> --
>> Bryan
>> Sent from my iPhone 5...No electrons were harmed in the sending of this message.
>> 
>> 
>> 
>>> On Aug 3, 2014, at 12:12, Tim Sawyer <tim.sawyer at mac.com> wrote:
>>> 
>>> You’ll probably find a script here you can use or adapt: http://www.qsl.net/k0kn/scripts.html
>>> --
>>> Tim
>>> :wq
>>> 
>>>> On Aug 3, 2014, at 9:06 AM, Skyler F <electricity440 at gmail.com> wrote:
>>>> 
>>>> Hi,
>>>> 
>>>> I have some cooling fans. 
>>>> 
>>>> I would like to have the fans turn ON when the radio transmits, and stay on for sixty seconds after the radio stops transmitting and then turn off. 
>>>> 
>>>> I would like to use the I/O interface on my URIx. (The I/O will then trigger a Solid State Relay ,and then turn on the Fans)
>>>> 
>>>> How can I do this with the software? Can I write it with Scripts?
>>>> 
>>>>  What commands would I need to detect if it is sending a PTT, detect PTT off, wait time, turn the output to high, turn the output to low, always "look" for a TX, etc.
>>>> 
>>>> Example code is always really nice for a beginner like me :-)
>>>> 
>>>> 73
>>>> 
>>>> Skyler
>>>> KDØWHB
>>>> 
>>>> -- 
>>>> Skyler Fennell
>>>> amsatnet.info
>>>> KDØWHB
>>>> electricity440 at gmail.com
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> 
> 
> -- 
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140803/f901f2a2/attachment.html>