[App_rpt-users] pfsense router?

[Tim Sawyer]

Mike,

Thanks I’ll try that as soon as the pfsense router gets reinstalled. Just for grins could you do “iax2 show registry”? Is the perceived port correct?


*CLI> iax2 show registry 
Host                  dnsmgr  Username    Perceived             Refresh  State
67.215.233.178:4569   N       2504        108.13.3.89:4569           60  Registered
--
Tim WD6AWP

> On Aug 22, 2014, at 7:56 AM, Michael Wolthuis <wolthuis at gmail.com> wrote:
> 
> Tim,
> I run PFSense with many of my Allstar nodes.  I have to set STATIC outbound NAT for the specific IP addresses that are Asterisk.  This will cause them to not pick random ports outbound.  
> 
> I am not sure what iax2 show registry does, but I could not get it to work until I put in a static NAT outbound.
> 
> Here is a copy of my outbound NAT statement for one of my nodes:
> 
> WAN  	172.16.12.22/32	udp/4569	*	udp/4569	WAN address	*	YES
> 
> I believe the key is the last YES, which is the STATIC PORT heading.
> 
> Hope that helps,
> Mike
> kb8zgl
> 
> 
> From: Tim Sawyer <tim.sawyer at mac.com <mailto:tim.sawyer at mac.com>>
> Date: Friday, August 22, 2014 at 10:52 AM
> To: "app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>" <app_rpt-users at ohnosec.org <mailto:app_rpt-users at ohnosec.org>>
> Subject: [App_rpt-users] pfsense router?
> 
> Is anyone using a pfsense router in your Asterisk network? While app_rpt seems to work fine it shows a weird port, not 4569, with “iax2 show registry”. I assume pfsense is doing something weird with NAT that I don’t understand. Can anyone shed some light on this subject?
> 
> 
> 
> --
> Tim WD6AWP
> 
> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20140822/d348577f/attachment.html>